Table of Contents

• PLANNING AND ORGANISING FOR GLOBAL MANUFACTURING
  Parry-Jones, R.

• ASPECTS OF GLOBAL DESIGN WITH THE NEW 787 BOEING DREAM LINER PROJECT
  Carolan, T.

• CANADIAN RESEARCH IN THE GLOBAL AUTOMOTIVE INDUSTRY
  Frise, P. R.

• A NEW MATH MODEL FOR GEOMETRIC TOLERANCES TO PROMOTE INTERCHANGEABILITY IN MANUFACTURING: A KEY TO SUCCESS IN GLOBAL AND NON-COLLOCATED DESIGN
  Davidson, J. K.; Shah, J. J.

• TEN TIPS FOR BETTER DESIGN FROM FORENSIC EXPERIENCE
  Hales, C.

• ADVANCED TECHNOLOGY FOR SPACE EXPLORATION
  Antonsson, E.

• A THE LAWS OF DESIGN
  McGowan, P. A.

• SOME COUNTER-INTUITIVE ENGINEERING DESIGN PROBLEMS IN VIBRATION; ON HOW A LITTLE KNOWLEDGE CAN CONFUSE OUR UNDERSTANDING OF COMPLEX PROBLEMS
  Hunt, H.

• ENGINEERING DESIGN KNOWLEDGE/INFORMATION MANAGEMENT
  Gooch, S.

• GLOBAL DESIGN TEAMS AND PROFESSIONAL DEVELOPMENT AND ISSUES IN ENGINEERING EDUCATION
  Finger, S.

• CAD TOOLS AND DESIGN FOR X AND MECHATRONICS
  Chakrabarti, A.

• Centrifugal Slurry Pump Design for Safety
  Burgess, K. E.

• ASSEMBLY CONTROL PROCESS DEVELOPMENT FOR GAS TURBINES
  Wright, C.

• DESIGN OF ROLLER AND SENSOR MECHANISMS FOR AN INNOVATION OF PAPER HANDLING MACHINE
  Masuyama, T.; Matsuzawa, M.; Sakagami, E.; Fukatsu, K.; Ueno, S.; Inoue, K.

• A MODULAR DEMONSTRATION TOOL FOR ASSESSING AND DEVELOPING PRODUCT CONCEPTS PAST THE INITIAL IDEA IN MOBILE DEVICE DEVELOPMENT
  Takala, R.; Keski-Jaskari, T.

• ROBUST LAUNCH OF NEW AIRCRAFT PROGRAMMES
  Frankenberger, E.

• HAPTIC CUSTOMIZATION OF PRODUCT PHYSICAL PROPERTIES IN A VIRTUAL ENVIRONMENT
  Chen, Y.; Lian, L.; Yang, Z.

• AN ADVANCED TACTILE INKJET PRINTER: ENHANCING TACTILE MAP DESIGN AND PRODUCTION METHODS
  Dinar, S.; McCallum, D.; Sheldon, D. F.; Wilson, G. B.

• IMPROVEMENTS TO THE DESIGN AND MANUFACTURE OF TACTILE MAPS PRODUCED USING INK-JET TECHNOLOGY
  McCallum, D.; Dinar, S.; Ahmed, K.; Sheldon, D.

• USER-CENTERED DESIGN VIA SENSORY ANALYSIS TECHNIQUES AND OPTIMIZATION PROCEDURES: APPLICATION TO MUSICAL INSTRUMENT DESIGN
  Petiot, J.-F.; Poirson, E.; Gilbert, J.

• DESIGN FOR FOOD QUALITY
  Fisher, C.; Medland, A. J.; Mullineux, G.

• DESIGN FOR CONVERGENCE: MANAGING TECHNOLOGICAL PARTNERSHIPS AND COMPETENCIES ACROSS AND WITHIN INDUSTRIES
  Hacklin, F.; Adamsson, N.; Marxt, C.; Norell, M.

• A MODEL FOR EVALUATING AND IMPROVING COLLABORATIVE PRODUCT DEVELOPMENT
  Elfving, S.; Jackson, M.

• IMPACT OF RESEARCH IN ENGINEERING DESIGN ON INDUSTRIAL INNOVATION
  Hein, L.

• APPRAISAL FOR THE TECHNOLOGY PROGRAMMES – DEVELOPMENT AND VERIFICATION OF A NEW ASSESSMENT MODEL IN SOME NATIONAL TECHNOLOGY PROGRAMMES IN FINLAND
  Berg, P.; Pihlajamaa, J.; Lindroos, M.

• ENABLING FACTORS IN SUCCESSFUL PRODUCT DEVELOPMENT
  Tang, V.; Liu, B.; Kellam, B. A.; Otto, K. N.; Seering, W. P.

• ANALYSIS OF THE DECISION MAKING PROCESSES IN NPD PROJECTS WITHIN INNOVATIVE COMPANIES
  García-Melón, M.; Aragonés, P.; Poveda, R.; Zabala, J.

• EVALUATION METHOD TO DETERMINE THE SUCCESS POTENTIAL AND THE DEGREE OF INNOVATION OF TECHNICAL PRODUCT IDEAS AND PRODUCTS
  Binz, H.; Reichle, M.

• LOGISTIC PROFILE: A NEW CONCEPT FOR INTERFACING DESIGNERS AND LOGISTICIANS IN CONCURRENT ENGINEERING ENVIRONMENT
  Koike, T.; Blanco, E.; Penz, B.

• SEMIOTREND: EVOLUTIONAL AND DYNAMIC TREND MAPS SUPPORTING CREATIVITY FOR DESIGNERS
  Petiot, J.-F.; Guénand, A.

• IDENTIFYING AND EVALUATING PARALLEL DESIGN ACTIVITIES USING THE DESIGN STRUCTURE MATRIX
  Whit?eld, R. I.; Duffy, A. H. B.; Gartzia-Etxabe, L. K.

• VISUALISING CHANGE PROPAGATION
  Keller, R.; Eger, T.; Eckert, C. M.; Clarkson, P. J.

• MODELLING AND SIMULATING ITERATIVE DEVELOPMENT PROCESSES
  Wynn, D. C.; Eckert, C. M.; Clarkson, P. J.

• SUCCESS FACTORS IN COLLABORATION MANAGEMENT IN INDUSTRIAL PRODUCT DEVELOPMENT
  Stetter, R.; Baumberger, C.; Lindemann, U.

• A METHODOLOGY FOR PROFILING COMPUTER BASED DESIGN ACTIVITIES
  Campbell, D. R.; Culley, S. J.; McMahon, C. A.; Coleman, P.

• THE DEVELOPMENT AND PILOTING OF A NOVEL METHODOLOGY FOR DETERMINING HOW DESIGNERS SPEND THEIR WORKING TIME
  Robinson, M. A.

• USING PATTERN LANGUAGES IN DESIGN ENGINEERING
  Salustri, F. A.

• AN EXPLORATION OF DESIGN INFORMATION CAPTURE AND REUSE IN TEXT AND VIDEO MEDIA
  Eris, O.; Mabogunje, A.; Jung, M.; Leifer, L.; Khandelwal, S.; Hutterer, P.; Hessling, T.; Neeley, L.

• A CASE STUDY TO ILLUMINATE THE CONCEPTS OF DESIGN EXPERTISE AND DESIGNER FLAIR IN ENGINEERING DESIGN
  Lewis, W.; Field, B.; Weir, J.

• IMPROVING COLLABORATIVE DESIGN TOOLS IN AUTOMOTIVE INDUSTRY: A CASE STUDY
  Mathelin, S.; Boujut, J.-F.; Tollenaere, M.

• ENABLING PRECONDITIONS FOR GEOMETRICAL APPLICATION IN PRECONCEPTUAL STAGES OF ENGINEERING DESIGN
  Fuxin, F.

• UNDERSTANDING THE SEARCH FOR INFORMATION IN THE AEROSPACE DOMAIN
  del-Rey-Chamorro, F.; Wallace, K.

• “PUSH-BASED” STRATEGIES FOR IMPROVING THE EFFICIENCY OF INFORMATION MANAGEMENT IN DESIGN
  Campbell, D. R.; Culley, S. J.; McMahon, C. A.

• AN ASSESSMENT OF QUALITY MEASURES FOR ENGINEERING INFORMATION SOURCES
  Culley, S. J.; Davies, S.; Hicks, B. J.; McMahon, C. A.

• EXPANDING PRODUCT AUDIT METHODOLOGY THROUGHOUT THE AUTOMOTIVE SUPPLY CHAIN TO FACILITATE IMPROVEMENT IN CRAFTSMANSHIP DURING NEW PRODUCT INTRODUCTION
  Turley, G. A.; Williams, M. A.; Tennant, C.

• IMPROVING COMMUNICATION OF DESIGN TARGET REQUIREMENTS TO FACILITATE ENHANCED CRAFTSMANSHIP DELIVERY
  Radford, J.; Williams, M.; Tennant, C.

• SEMANTICS AND VALIDATION OF LARGE INTER-COMPANY PRODUCT MODELS
  Opletal, S.; Roller, D.

• UNDERSTANDING THE INFORMATION SYSTEMS INFRASTRUCTURE OF ENGINEERING SMES
  Hicks, B. J.; Culley, S. J.; McMahon, C. A.

• PREREQUISITES FOR THE IMPLEMENTATION OF A PRODUCT DATA AND PROCESS MANAGEMENT TOOL IN SME
  Pol, G.; Jared, G.; Merlo, C.; Legardeur, J.

• PROVIDING COMMUNICATION MEDIA FOR DISTRIBUTED DESIGN
  Grieb, J.; Lindemann, U.

• VISUALISING COLLABORATION IN VERY LARGE DESIGN TEAMS
  Dong, A.; Moere, A. V.

• MANAGING SHARED UNDERSTANDING IN COLLABORATIVE DESIGN PROJECTS
  Kleinsmann, M.; Buijs, J.; Valkenburg, R.

• TOWARDS PLM IMPLEMENTATION METHOD IN SME
  Eynard, B.; Merlo, C.; Pol, G.

• TOWARDS TRUE COLLABORATION IN GLOBAL DESIGN TEAMS?
  Törlind, P.; Larsson, A.; Löfstrand, M.; Karlsson, L.

• GETTING PHYSICAL – INTERACTING WITH PHYSICAL OBJECTS IN DISTRIBUTED COLLABORATION
  Bergström, M.; Törlind, P.

• COMPUTER-SUPPORTED ENVIRONMENT FOR CREATIVITY PROCESSES IN GLOBALLY DISTRIBUTED TEAMS
  Ganser, C.; Kennel, T.; Birkeland, N.; Kunz, A.

• SUPPORTING KNOWLEDGE CREATION IN RESEARCH ORGANISATIONS THROUGH BIBLIOGRAPHICAL RESEARCH
  Jaime, A.; Gardoni, M.; Mosca, J.; Vinck, D.

• HOW RELEVANT IS DESIGN SCIENCE IN A GLOBAL PRODUCT DEVELOPMENT WORLD? – A REVIEW
  Sheldon, D. F.

• CONFIGURATION SYNTHESIS OF A VARIABLE COMPLEXITY TRUSS
  Antonsson, E. K.; Nicaise, F.; Honda, T.

• SENSITIVITY ANALYSIS: A PRIORI AND POST FACTO
  Giess, M. D.; Culley, S. J.; Hicks, B. J.

• SOFTWARE ARCHITECTURE FOR FLEXIBLE INTEGRATION OF SIMULATION IN THE PRODUCT DEVELOPMENT PROCESSES
  Hamri, O.; Léon, J.-C.; Giannini, F.; Falcidieno, B.

• VIRTUAL SIMULATION-DRIVEN SYNTHESISERS FOR MECHANICAL GEAR SYSTEMS
  Starling, A. C.; Shea, K.

• RESEARCH STUDY IN CREATIVE SOFTWARE AS TOOL TO ASSIST THE CONCEPTUAL DESIGN STAGE
  Chaur, J.; Lloveras, J.

• AUTOMATIC DESIGN OF HYDRAULIC PRESS BRAKE FOR SHEET METAL BENDING
  Colombo, G.; Girotti, A.; Rovida, E.

• IDENTIFYING REQUIREMENTS FOR RENDERING IN CONCEPTUAL DESIGN
  Tenneti, R.; Duffy, A.

• HUMAN MODELING BENEFITS IN WORKSTATION DESIGN
  Gauthier, F.; Caron, H.

• EXPERIMENTS WITH A CAMERAPHONE-AIDED DESIGN (CPAD) SYSTEM
  Farrugia, P. J.; Borg, J. C.; Camilleri, K. P.; Spiteri, C.

• SENSITIVITY AS AN ASSESSMENT CRITERION FOR PRODUCT SPECTRA
  Maurer, M.; Lindemann, U.

• A DESIGN METHODOLOGY OF SERVICES
  Tomiyama, T.

• NEED FOR NEW ENGINEERING DESIGN METHODOLOGIES FOR FUNCTIONAL SALES BUSINESS – AN INTERNATIONAL SURVEY CONCERNING THE EXPERIENCES OF THE BUSINESS CONCEPT WITHIN JAPANESE AND SWEDISH INDUSTRIES
  Sundin, E.; Lindahl, M.; Shimomura, Y.; Sakao, T.; Björkman, M.

• INTEGRATION OF PRODUCTS AND SERVICES – TOWARDS SOLUTION PROVIDER AND PERFORMANCE PARTNER
  Salminen, V.; Pillai, B.

• EXECUTIVE SUMMARY USING BLUEPRINTING METHOD FOR DEVELOPING PRODUCT-SERVICE SYSTEMS
  Boughnim, N.; Yannou, B.

• DESIGN FOR IMPROVED TOOLING THROUGH AN UNDERSTANDING OF MACHINE-MATERIAL INTERACTION
  Sirkett, D. M.; Hicks, B. J.; McPherson, C. J.; Medland, A. J.; Mullineux, G.; Berry, C.

• PERFORMANCE LIMITS OF ASSEMBLING MACHINES
  Schmidt, A.; Höhne, G.

• LEAN MANUFACTURING FOR SMES: ENABLING RAPID RESPONSE TO DEMAND CHANGES
  Achanga, P.; Shehab, E.; Roy, R.; Nelder, G.

• ENHANCING PRODUCTIVITY USING OFF-LINE PERFORMANCE MODELLING
  Burvill, C.; Dagher, C.; Hughes, P.; Hughes, R.

• INDUSTRIAL NEED TO IMPROVE COST INTEGRATION IN MULTI-CRITERIA DECISION DURING DESIGN – CASE STUDY AT AIRBUS AND EUROCOPTER
  Angéniol, S.; Gardoni, M.; Yannou, B.; Chamerois, R.

• ANALYSIS OF CONNECTIONS AND FASTENERS TO DETERMINE DISASSEMBLY AND STRENGTH CHARACTERISTICS
  Wünsche, T.; Meyer-Eschenbach, A.; Blessing, L.

• THERMAL AND ENVIRONMENTAL ASSESSMENT OF A CONCEPTUAL WASTE HEAT RECOVERY SYSTEM FOR AUTOMOTIVE APPLICATION
  Ghojel, J. I.

• INTELLIGENT DESIGN OF ROTOR PROFILES FOR EFFICIENT PERFORMANCE OF TWIN-SCREW SUPERCHARGERS
  Ilie, K.; Subic, A.

• THE WILLIAMS CARP CAGE: ENGINEERING-BASED DESIGN ENHANCES A SCIENCE-BASED INVENTION
  Weir, J.; Burvill, C.; Leary, M.

• KINEMATIC AND CONTROL DESIGN FOR A DEXTEROUS MECHANICAL HAND
  Dunlop, G. R.

• EXPERIENCE WITH DISTRIBUTED DEVELOPMENT OF HOUSEHOLD APPLIANCES
  Meyer-Eschenbach, A.; Blessing, L.

• CONTRIBUTION OF VALUE ANALYSIS TO THE EVALUATION OF INNOVATING PRODUCT DESIGN SOLUTIONS
  Bigand, M.; Yim, P.

• THE ROLE OF DESIGN FREEZE IN PRODUCT DEVELOPMENT
  Eger, T.; Eckert, C.; Clarkson, P. J.

• REQUIREMENT AND COST-DRIVEN PRODUCT DEVELOPMENT PROCESS
  Deubel, T.; Steinbach, M.; Weber, C.

• TOWARDS AN INTEGRATED DESIGN OF PRODUCT AND PACKAGING
  Bramklev, C.; Bjärnemo, R.; Jönson, G.; Johnsson, M.

• METHOD FOR ALIGNMENT OF PRODUCT AND PRODUCTION CONCEPTS
  Pedersen, R.; Kvist, M.; Mortensen, N. H.

• DEMANDS ON ENGINEERING DESIGN CULTURE FOR IMPLEMENTING FUNCTIONAL PRODUCTS
  Löfstrand, M.; Larsson, T.; Karlsson, L.

• A METHODOLOGY FOR THE EXTRAPOLATORY DESIGN OF SUPERIOR PRODUCTS
  Cross, M.; Sivaloganathan, S.

• FACILITATING DECISION-MAKING IN PRE-DEVELOPMENT
  Kool, G. M.; Roozenburg, N. F. M.

• LONGITUDINAL ANALYSIS OF THE IMPACT OF REQUIREMENTS MANAGEMENT ON THE PRODUCT DEVELOPMENT PROCESS IN A MEDIUM SIZED ENTERPRISE
  Schmidt-Kretschmer, M.; Blessing, L.

• DEVELOPMENT OF A FRONT-END PROJECT MANAGEMENT TOOL FOR THE PRODUCT INNOVATION PROCESS
  Jamali, N.; Perpall, E.; Arsal, K.; Nyffenegger, F.; Meier, M.

• ON THE CONTENT OF A PRODUCT IDEA
  Hansen, C. T.; Andreasen, M. M.

• A BEHAVIOURAL MODEL FOR REPRESENTING BIOLOGICAL AND ARTIFICIAL SYSTEMS FOR INSPIRING NOVEL DESIGNS
  Chakrabarti, A.; Sarkar, P.; Leelavathamma, B.; Nataraju, B. S.

• TOWARDS COMPUTER ASSISTED DISTRIBUTED DESIGN
  Medland, A. J.; Hicks, B. J.; Mullineux, G.; Newnes, L. B.; Daniel, J.

• TIME CYCLE EFFECTS IN DESIGN IDEATION
  Perttula, M.; Sipilä, P.

• EXECUTIVE SUMMARY DESIGN PERFORMANCE: HOW CAN WE MEET HUMAN LIMITATIONS WITH HUMAN RESOURCES?
  Badke-Schaub, P.

• A QUANTITATIVE STUDY OF IDEATION, VISUALISATION AND GRAPHICAL SKILLS IN ENGINEERING DESIGN
  Weir, J.; Lewis, B.; Burvill, C.; Field, B.

• INTERACTIONS MODELLING BETWEEN FACTORS INFLUENCING MANAGEMENT OF DESIGN SYSTEM EVOLUTION
  Robin, V.; Sperandio, S.; Blanc, S.; Girard, P.

• CHARACTERIZATION OF DESIGN SITUATIONS AND PROCESSES AND A PROCESS MODULE SET FOR PRODUCT DEVELOPMENT
  Ponn, J.; Lindemann, U.

• EVOLUTION OF PROPERTY PREDICTABILITY DURING CONCEPTUAL DESIGN
  Salonen, M.; Hansen, C. T.; Perttula, M.

• AN INFORMATION-CENTRED APPROACH TO THE DEVELOPMENT AND IMPLEMENTATION OF DESIGN METHODS
  Weigt, M.

• DEFINITIONS AND TEMPORAL POSITIONING OF THE CONCEPTS LINKED TO DECISION MAKING IN INDUSTRIAL PROJECT DESIGN – DIKCORAC
  Cardinal, J. S.-L.; Bocquet, J.-C.

• INTEGRATION OF SOURCING ASPECTS INTO TARGET COSTING
  Nissl, A.; Lindemann, U.

• DESIGN AND DEVELOPMENT OF A SYMMETRICAL WOBBLE-PLATE COMPRESSOR FOR NATURAL GAS VEHICLE REFUELING
  Ardiyansyah; Musa, M. N.; Abdul-Latif, A.; Abdullah, M. A.

• THE ROLE OF KNOWLEDGE AND EXPERIENCE IN ENGINEERING DESIGN
  Ahmed, S.; Hacker, P.; Wallace, K.

• IDENTIFYING AND ENHANCING CONCEPTUAL DESIGN CAPABILITIES
  Burvill, C.; Alirezaee, T.; Field, B.

• CASE STUDIES ON THE INFLUENCE OF THE DESIGN SCENARIO ON CONCEPT GENERATION
  Leary, M.; Burvill, C.; Weir, J.

• METHOD USING A SELF-ORGANISING MAP FOR DRIVER CLASSIFICATION AS A PRECONDITION FOR CUSTOMER ORIENTED DESIGN
  Albers, A.; Albrecht, M.

• USE AND USEFULNESS OF MAIL SURVEYS AS A METHOD OF DESIGN RESEARCH
  Gries, B.; Blessing, L.

• EXCHANGE OF PRODUCT DATA IN COOPERATIVE SHIPBUILDING PROJECTS
  Gsell, H.; Homburg, N.; Müller, D. H.

• A STUDY OF THE INFORMATION CONTENT OF THE ENGINEER’S LOGBOOK
  Hicks, B. J.; Huet, G.; Culley, S. J.; McAlpine, H.

• EFFECT-ORIENTED DESCRIPTION OF VARIANT RICH PRODUCTS
  Hami-Nobari, S.; Blessing, L.

• BENEFITS OF A PROJECT MEMORY TO ENGINEERING DESIGN
  Mekhilef, M.; Bigand, M.; Bourey, J.-P.

• VALUING KNOWLEDGE MANAGEMENT IMPACT ON ENGINEERING DESIGN ACTIVITIES
  Gardoni, M.; Dudezert, A.

• SPECIFICATION OF SIMULATION DATA MANAGEMENT ENVIRONMENT INTEGRATED WITH PDM
  Charles, S.; Eynard, B.

• DOCUMENTATION AND ENHANCEMENT OF THE TRACEABILITY OF FINITE-ELEMENT-ANALYSIS
  Maus, R.; Weber, C.

• FROM FUNCTION TO CONTEXT TO FORM: SUPPORTING THE CONSTRUCTION OF THE PRODUCT IMAGE
  Restrepo, J.

• TEACHING DESIGN AND ENGINEERING: A REVIEW OF PRODUCT DESIGN ENGINEERING PROGRAMS OFFERED THROUGH THE FACULTY OF DESIGN, SWINBURNE UNIVERSITY OF TECHNOLOGY
  Anderson, L.; Jackson, S.

• DESIGN AN ANIMAL ANALOGIES FOR THE DEVELOPMENT OF CREATIVITY
  Dowlen, C.

• THE IMPROVEMENT OF ENGINEERING DESIGN EDUCATION THROUGH THE STUDY OF THE TECHNICAL HISTORICAL HERITAGE
  Fargnoli, M.; Rovida, E.; Troisi, R.

• IF THE FUTURE IS POST-MODERN, HOW SHOULD DESIGN TEACHING CHANGE?
  Dowlen, C.

• STUDENT DESIGN-AND-BUILD PROJECTS REVISITED
  Churches, A.; Magin, D.

• AN OUTCOMES BASED FIRST YEAR ENGINEERING DESIGN SYLLABUS AIMED AT WELL PREPARED AND DISADVANTAGED STUDENTS
  Redelinghuys, C.

• MAXIMISING TEAM CREATIVITY USING MEDITATION AS A TEMPLATE FOR ANALOGY & CO-EVOLUTIONARY DESIGN PROCESS – A PRELIMINARY REPORT
  Pahl, A.-K.

• DESIGN SPACE BLENDING – A KEY FOR CREATIVE DESIGN
  Taura, T.; Nagai, Y.; Tanaka, S.

• TOWARD NON MATURE INFORMATION MANAGEMENT IN COLLABORATIVE DESIGN PROCESSES
  Grebici, K.; Blanco, E.; Rieu, D.

• DESIGN AUTOMATION IN SMES – CURRENT STATE, POTENTIAL, NEED AND REQUIREMENTS
  Cederfeldt, M.; Elgh, F.

• INNOVATION AND DESIGN: COMPUTATIONAL SIMULATIONS
  Sosa, R.; Gero, J. S.

• A FRAMEWORK FOR DESIGN RATIONALE RETRIEVAL
  Kim, S.; Bracewell, R. H.; Wallace, K. M.

• TOWARD A THEORY OF DISTRIBUTED INTERDISCIPLINARY PROJECT-BASED DESIGN EDUCATION
  Eris, O.; Holliger, C.; Elspass, W.; Leifer, L.

• TEACHING GLOBAL ENGINEERING DESIGN
  Devon, R. F.; Bilén, S. G.; Sierra, J. S.; Olfs, P.

• A DESIGN COLLABORATORY FOR ENGINEERING STUDENTS
  Finger, S.; Gelman, D.; Fay, A.; Szczerban, M.

• ENHANCING DESIGN LEARNING USING A DIGITAL REPOSITORY
  Wodehouse, A.; Grierson, H.; Ion, W. J.; Juster, N. P.; McGill, L.

• WEB-SUPPORTED PRODUCT CONCEPT DEVELOPMENT
  Holmdahl, L.; Björk, E.; Ottosson, S.; Vajna, S.

• VALUE CENTRED DESIGN: UNDERSTANDING THE NATURE OF VALUE
  Reber, M.; Duffy, A.

• GENERAL DESIGN THEORY AND GENETIC EPISTEMOLOGY
  Mishima, M.; Kikuchi, M.

• THE DESIGN OF SELF EVOLVING BEHAVIOUR: SELF-EVOLUTION I
  Hollier, W.; Burvill, C.; Davoren, J.

• SYMMETRY IN GEOMETRIC FEATURES AND SELF ASSEMBLY: SELF-EVOLUTION II
  Hollier, W.; Burvill, C.; Davoren, J.

• DESIGN ARGUMENTATION PROFILE – A QUANTITATIVE DECISION SUPPORT FRAMEWORK FOR CONCEPT EVALUATION IN THE EARLY PRODUCT DEVELOPMENT PHASE
  Petersen, S. I.

• UTILIZATION OF PRODUCT DEVELOPMENT TOOLS AND METHODS: JAPANESE SURVEY AND INTERNATIONAL COMPARISON
  Fujita, K.; Matsuo, T.

• AN EXTENSIVE AND DETAILED VIEW OF THE APPLICATION OF DESIGN METHODS AND METHODOLOGY IN INDUSTRY
  Birkhofer, H.; Jänsch, J.; Kloberdanz, H.

• DERIVING A COMPONENT BASIS FOR COMPUTATIONAL FUNCTIONAL SYNTHESIS
  Kurtoglu, T.; Campbell, M. I.; Bryant, C. R.; Stone, R. B.; McAdams, D. A.

• CONCEPT GENERATION FROM THE FUNCTIONAL BASIS OF DESIGN
  Bryant, C. R.; Stone, R. B.; McAdams, D. A.; Kurtoglu, T.; Campbell, M. I.

• A METHOD FOR STRUCTURE SHARING TO ENHANCE RESOURCE EFFECTIVENESS
  Chakrabarti, A.; Singh, V.

• EXTENDED CAD MODEL
  Bojcetic, N.; Pavkovic, N.; Pavlic, D.

• EXTENDING THE DESIGN OPPORTUNITIES AFFORDED BY MODELLING FRAMEWORKS
  Dalton, J. A.; Norman, P. W.; Sen, P.; Whittle, S.

• CUSTOMER DEMAND DISCOVERY FOR NEW PRODUCT DESIGN
  Li, X.; Zhou, J.; Ren, J.; Lu, W.

• SUPPORTING EARLY DESIGN PHASES BY STRUCTURING INNOVATIVE IDEAS: AN INTEGRATED APPROACH PROPOSAL
  Legardeur, J.; Fischer, X.; Vernat, Y.; Pialot, O.

• WHAT IS “COMPLEXITY”?
  Weber, C.

• MANAGING DESIGN ALTERNATIVES: FROM THE ALTERNATIVES STATIC MODEL TOWARDS AIDED DESIGN
  Nowak, P.; Eynard, B.

• OVERCOMING REPRESENTATION ISSUES WHEN INCLUDING AESTHETIC CRITERIA IN EVOLUTIONARY DESIGN
  Machwe, A. T.; Parmee, I. C.; Miles, J. C.

• INTRODUCING GRID-BASED, SEMI-AUTONOMOUS EVOLUTIONARY DESIGN SYSTEMS
  Parmee, I. C.; Abraham, J.; Shackelford, M.; Spilling, D.; Rana, O. F.; Shaikhali, A.

• PRINCIPLES FOR THE DEVELOPMENT OF A COMPUTER AIDED CONCEPTUAL DESIGN TOOL
  Vargas-Hernandez, N.; Shah, J. J.

• OPTIMAL SPATIAL ARRANGEMENT OF SHIPBUILDING BLOCKS IN THE PRE-ERECTION AREA OF SHIPYARD
  Varghese, R.; Yoon, D. Y.

• TOWARDS AN EVOLVABLE CHROMOSOME MODEL FOR INTERACTIVE COMPUTER DESIGN SUPPORT
  Fan, Z.; Andreasen, M. M.; Wang, J.; Goodman, E. D.

• REPRESENTING CK THEORY WITH AN ACTION LOGIC
  Salustri, F. A.

• TOWARDS A PRODUCT STRUCTURE FOR BRIDGING INDUSTRIAL DESIGN AND ENGINEERING DESIGN ISSUES
  Schachinger, P.; Bergman, P.; Brunö, K.

• PERFORMANCE BASED STANDARDS ASSESSMENT OF A RIGID URBAN TRANSPORT VEHICLE
  Leary, M.; Burvill, C.

• TOLVIS – VISUALIZATION OF POSSIBLE SHAPE VARIATIONS RESULTING FROM SHAPE AND POSITION TOLERANCES
  Koch, A.; Meerkamm, H.

• APPROACH FOR AN INTEGRATED ACHIEVEMENT OF THE COST TARGET
  Nissl, A.; Lindemann, U.

• THE DEVELOPMENT OF A SYSTEMATIC DESIGN FOR CHANGEOVER METHODOLOGY
  Reik, M. P.; McIntosh, R. I.; Owen, G. W.; Mileham, A. R.; Culley, S. J.

• IMPACT OF VIRTUAL REALITY SIMULATION TOOLS ON DFA AND PRODUCT DEVELOPMENT PROCESS
  Mikchevitch, A.; Léon, J.-C.; Gouskov, A.

• COMPUTER AIDED EVALUATION OF DESIGN RULES FOR MICRO PARTS
  Albers, A.; Burkardt, N.; Marz, J.; Hauser, S.

• APPLYING DESIGN FOR MANUFACTURE AND ASSEMBLY TECHNIQUES TO LARGE SCALE WELDMENTS PRODUCED IN SMALL VOLUMES
  Stauffer, L.; Smith, W.

• ONTOLOGY-BASED TRANSFORMATION FROM AN EXTENDED FUNCTIONAL MODEL TO FMEA
  Koji, Y.; Kitamura, Y.; Mizoguchi, R.

• A THEORY-BASED ONTOLOGY OF DESIGN INDUCED ERROR
  Shin, I. J.; Busby, J. S.; Hibberd, R. E.; McMahon, C. A.

• DON’T ENGINEERS CARE ABOUT OCCUPATIONAL HEALTH AND SAFETY?
  Broberg, O.

• INNOVATION SCENARIOS GENERATING A STRUCTURE FOR A TOOLKIT
  Hansen, P. K.; Bessant, J.; Eris, Ö.; Mabogunje, A.; Leifer, L.

• LEARNING TO CHANGE – A NETWORK APPROACH TO ENGINEERING MANAGEMENT DEVELOPMENT
  Ritzén, S.; Zika-Viktorsson, A.; Forslin, J.; Engwall, M.

• COMPETENCIES GROWTH IN MANUFACTURING FIRMS ENGAGED IN PRODUCT DEVELOPMENT – AN EMPIRICAL STUDY
  Cantamessa, M.

• COMPARATIVE STUDY OF DESIGN WITH APPLICATION TO ENGINEERING DESIGN
  Earl, C.; Eckert, C.; Bucciarelli, L.; Whitney, D.; Knight, T.; Stacey, M.; Blackwell, A.; Macmillan, S.; Clarkson, P. J.

• IDENTIFICATION OF PLATFORM LEVELS IN PRODUCT DEVELOPMENT
  Mortensen, N. H.; Harlou, U.; Andreasen, M. M.

• AN OVERVIEW OF THE VRS VIRTUAL PLATFORM
  Whit?eld, R. I.; Duffy, A. H. B.; Wu, Z.; Meehan, J.

• PLATFORM TEMPLATE
  Hansen, P. l. K.; Mikkola, J. H.

• SPECIFICATION OF INDIVIDUALIZED PRODUCTS BY NEURAL NETWORKS
  Maurer, M.; Biedermann, W.

• EVALUATING THE IMPACT OF PRODUCT VARIETY IN EARLY DESIGN PHASES THROUGH THE ANALYSIS OF INDUSTRIAL SCENARIOS
  Yahiaoui, A.; Boujut, J.-F.

• VARIANT DESIGN OF A PRODUCT FAMILY FOR SEGMENTED MARKET
  Lee, T.-P.; Liub, E.

• PREPARING FOR A PRODUCT PLATFORM – PRODUCT FAMILY HIERARCHY PROCEDURE
  Fiil-Nielsen, O.; Munk, L.; Mortensen, N. H.

• UTILISING THE CONCEPT OF A DESIGN’S BANDWIDTH TO ACHIEVE PRODUCT PLATFORM EFFECTIVENESS
  Berglund, F.; Claesson, A.

• MAPPING THE HEALTHCARE PROCESS IN ORDER TO DESIGN FOR PATIENT SAFETY
  Jun, G. C. T.; Ward, J.; Clarkson, P. J.

• BEST PRACTISE PRINCIPLES FOR THE PREVENTION OF CRISES IN PRODUCT DEVELOPMENT
  Dick, B.; Jokele, B.; Lindemann, U.

• LEARNING FROM DESIGN FAILURES – THE METHOD OF WEAK POINT ANALYSIS AND VIRTUAL DEVIATIONS
  Höhne, G.; Brix, T.; Sperlich, H.

• STUDIES OF DESIGN AND ASSEMBLY DEFECTS ON INTEGRATED AND MODULAR ARCHITECTURES
  Kenger, P.; Erixon, G.

• RISK ACROSS DESIGN DOMAINS
  Eckert, C.; Earl, C.; Stacey, M.; Bucciarelli, L. L.; Clarkson, P. J.

• A FRAMEWORK FOR THE HANDLING OF UNCERTAINTY IN ENGINEERING KNOWLEDGE MANAGEMENT TO AID PRODUCT DEVELOPMENT
  Goh, Y. M.; Booker, J. D.; McMahon, C. A.

• ROBUST PLANNING OF DESIGN TASKS USING SIMULATION
  Flanagan, T. L.; Eckert, C. M.; Keller, R.; Clarkson, P. J.

• DESIGN FOR VERSATILITY: THE CHANGING FACE OF WORKSPACES FOR COLLABORATIVE DESIGN
  Larsson, A.; Törlind, P.; Bergström, M.; Löfstrand, M.; Karlsson, L.

• WHAT IS DESIGN ENGINEERING AND HOW SHOULD IT BE TAUGHT? – PROPOSING A DIDACTICAL APPROACH
  Grimheden, M.; Hanson, M.

• A METHODOLOGY FOR CURRICULUM PLANNING AND EVALUATION OF THE DESIGN-ORIENTED COURSE “MECHANISM” BASED ON STUDENTS’ OUTCOMES
  Tsai, S.-J.; Chang, P.-F.; Wu, J.-C.

• INDUSTRIAL DESIGN ENGINEER – THE FUTURE OF TRADITION IN ENGINEERING EDUCATION
  Vidovics, B.; Bercsey, T.

• ELEMENTS FOR IMPROVING THE TEACHING OF THE LATER PHASES OF THE MECHANICAL ENGINEERING DESIGN PROCESS
  Motte, D.; Bjärnemo, R.; Andersson, P.-E.

• IDENTIFICATION, MEASUREMENT AND DEVELOPMENT OF DESIGN SKILLS IN ENGINEERING EDUCATION
  Shah, J. J.

• THE IMPACT OF SPATIAL ABILITIES ON THE COMPREHENSION OF DESIGN DRAWINGS
  Field, B.; Burvill, C.; Weir, J.

• A SYSTEMATIC APPROACH TO THE DESIGN AND IMPLEMENTATION OF DESIGN-BUILD-TEST PROJECT COURSES
  Andersson, S. B.; Malmqvist, J.; Wedel, M. K.

• MULTI-LEVEL PRODUCT MODEL TO SUPPORT THE LCA USE IN THE EARLY DESIGN PHASE
  Germani, M.; Mandorli, F.; Mengoni, M.

• PROPOSAL OF “MARGINAL REUSE RATE” FOR EVALUATING REUSABILITY OF PRODUCTS
  Umeda, Y.; Kondoh, S.; Sugino, T.

• A PROCEDURE TO IDENTIFY EFFECTIVE REDESIGN OPTIONS IN ECODESIGN
  Fargnoli, M.; Sakao, T.; Notarnicola, S.

• ECO-CONSCIOUS DESIGN BASED ON SINGLE COMPONENT POLYMERS FOR SUSTAINABLE SUPPLY MANAGEMENT IN AUTOMOTIVE PRODUCTION
  Dörsch, C.; Fikouras, I.; Burkert, R.; Müller, D. H.

• ECODESIGN IN TWELVE STEPS – PROVIDING SYSTEMATIC GUIDANCE FOR CONSIDERING ENVIRONMENTAL ASPECTS AND STAKEHOLDER REQUIREMENTS IN PRODUCT DESIGN AND DEVELOPMENT
  Wolfgang, W.; Kun-Mo, L.; In-Tae, J.; John-Hee, H.

• ASSESSING PRODUCT DEVELOPERSUPPLY CHAIN REPLATIONSHIP FOR THE ECO-CONSCIOUS DESIGN OF ELECTRONIC PRODUCTS
  Ge, P.; Wang, B.

• INDUSTRIAL INTEGRATION OF ENVIRONMENTAL ISSUES INTO THE ORGANISATION: PAST, PRESENT AND FUTURE CHALLENGES
  McAloone, T. C.

• AN EVOLVING MODEL OF DESIGN CULTURE
  Jolly, L.; Radcliffe, D.; Nycyk, M.; Andersen, J.

• DESIGN MANAGEMENT IN A CONSTRUCTION COMPANY
  Andersen, J.; Nycyk, M.; Jolly, L.; Radcliffe, D.

• DESIGN FOR WELLBEING: INNOVATIONS FOR PEOPLE
  Larsson, A.; Larsson, T.; Leifer, L.; Van der Loos, M.; Feland, J.

• COMBATING BARRIERS TO INCLUSIVE DESIGN: EVALUATION OF AN INCLUSIVE DESIGN TOOLKIT
  Dong, H.; Clarkson, P. J.

• TOWARDS A FORMAL DESIGN MODEL BASED ON A GENETIC DESIGN MODEL SYSTEM
  Storga, M.; Andreasen, M.s M.; Marjanovic, D.

• PRODUCT DEVELOPMENT AS A COMPLEX SOCIAL SYSTEM
  Pulm, U.

• COMPLEXITY MANAGEMENT DURING THE ANALYSIS OF MECHATRONIC SYSTEMS
  Felgen, L.; Deubzer, F.; Lindemann, U.

• THREE-DIMENTIONAL DESIGN LAYOUT OPTIMIZATION FOR MECHATRONIC DEVICES USING THE SIMULATED ANNEALING APPROCH
  Shen, H.; Subic, A.; Bourmistrov, A.

• ANALYSIS OF 900 POP-UP STRUCTURES FOR CAD SYSTEMS
  Mak, K. W.; Tor, S. B.; Lee, Y. T.

• APPLYING THE NEW VDI DESIGN GUIDELINE 2206 ON MECHATRONIC SYSTEMS CONTROLLED BY A PLC
  Bathelt, J.; Jönsson, A.; Bacs, C., Dierssen, S.; Meier, M.

• SEMANTIC WEB SERVICES FOR THE KNOWLEDGE-BASED DESIGN OF MECHATRONIC SYSTEMS
  Bludau, C.; Welp, E. G.

• MODEL-BASED DESIGN OF ACTUATION CONCEPTS: A SUPPORT FOR DOMAIN ALLOCATION IN MECHATRONICS
  Jansen, S.; Welp, E. G.

• IMPROVING THE CONCEPTUAL DESIGN OF TURBINE ROTOR BLADE COOLING SYSTEMS
  Bell, C. P.; Dawes, W. N.; Jarrett, J. P.; Clarkson, P. J.

• THE CONCEPT OF FUNCTIONAL SURFACES AS CARRIERS OF INTERACTIVE PROPERTIES
  Sellgren, U.; Andersson, S.

• PART SYNTHESIS USING PHYSICAL LAWS AND ALLOCATION OF WIRK ELEMENTS
  Rihtarši?c, J.; Žavbi, R.; Duhovnik, J.

• BALANCING PROPERTIES WHILE SYNTHESISING A PRODUCT CONCEPT – A METHOD HIGHLIGHTING SYNERGIES
  Almefelt, L.

• DEVELOPMENT OF A SIMPLE INFORMATION PUMP
  Matthews, P. C.; Keegan, J. D.; Robson, J. R.

• MACHINE LEARNING STOCHASTIC DESIGN MODELS
  Matthews, P. C.

• THE INTEGRATED DEVELOPMENT OF THE CONFIGURABLE PRODUCT
  Pavlic, D.; Bojcetic, N.; Marjanovic, D.

• ROBUST PRODUCT CONCEPT GENERATION
  Reich, Y.; Av, A. Z.

• TOWARDS AN IT SUPPORTED FUZZY FRONT END OF PRODUCT DEVELOPMENT
  Nyffenegger, F.; Jamali, N.; Kobe, C.; Meier, M.

• JOINING STANDARD AND INVENTIVE DESIGN. APPLICATION TO INJECTION MOLDING
  Eltzer, T.; Caillaud, E.; Cavallucci, D.; Lutz, P.

• PROPOSED QUALITY FUNCTION DEPLOYMENT IMPROVEMENTS
  Leary, M.; Burvill, C.; Weir, J.; Shafton, A.

• THE INFLUENCE OF BILLET PROCESSING ON THE MECHANICAL PROPERTIES OF FORGED 6061 ALUMINIUM
  Leary, M.; Burvill, C.

• ENHANCEMENT IN COUPLING TOLERANCE ANALYSIS AND ELASTIC DEFORMATIONS ON THE EXAMPLE OF A SERIAL LINEAR SUPPORT SYSTEM
  Lustig, R.; Hochmuth, R.; Meerkamm, H.

• IMPROVING THE PERFORMANCE OF A NATURAL GAS COMPRESSOR DESIGN PROCESS
  Ong, K. L.; Musa, M. N.; Abdul-Latif, A.

• TRADEOFF BETWEEN MODULARITY AND PERFORMANCE FOR ENGINEERED SYSTEMS AND PRODUCTS
  Hölttä, K.; Suh, E. S.; de Weck, O.

• UNDERSTANDING THE PERFORMANCE LIMITS OF HIGH-SPEED MACHINERY
  Mullineux, G.; Medland, A. J.; Hicks, B. J.; McPherson, C. J.

• PROPOSITION OF DISTINCTIVE INDUSTRIAL DESIGN BASED ON SHAPE AND COLOR FEATURE SPACE ANALYSIS
  Murakami, T.

• A STANDARD DESIGN PROCESS FOR THE BUILDING SECTOR
  Oumeziane, H.; Deshayes, P.; Bocquet, J.-C.

• IMPROVING DEVELOPMENT PROCESSES IN HOUSE-BUILDING THROUGH IMPLEMENTATION OF BEST NEW PRODUCT DEVELOPMENT PRACTICES
  Soetens, B. R. F.; Roozenburg, N. F. M.; Smulders, F. E. H. M.

• DESIGNING CONNECTIONS CONSIDERING CONNECTING AND DISCONNECTING PROCESS CHARACTERISTICS AND THE NUMBER OF REQUIRED FASTENERS
  Klett, J.; Blessing, L.

• NEGOTIATING OUTCOMES: CHALLENGES AND OPPORTUNITIES WITH INDUSTRY BASED STUDENT PROJECTS
  Bohemia, E.

• A COMPREHENSIVE FRAMEWORK FOR MULTIDISCIPLINARY DESIGN OPTIMIZATION
  Ray, T.

• IMPROVEMENT OF POWERTRAIN EFFICIENCY VIA CARF-TRANSMISSIONS
  Novak, W.; Stockmeier, M.; Bertsche, B.

• MODEL BASED VALIDATION OF AUTOMOTIVE POWERTRAINS
  Albers, A.; Schyr, C.

• EVOLUTION MODELLING AND PROBLEM CENTRED DESIGN OF MANUFACTURING SYSTEMS
  Geiskopf, F.; Kiefer, F.; Caillaud, E.; Villeneuve, F.

• AN APPLICATION OF A SERVICE DESIGN TOOL AT A GLOBAL WAREHOUSE PROVIDER
  Lindahl, M.; Sundin, E.; Shimomura, Y.; Sakao, T.

• DEVELOPMENT OF A FRAMEWORK FOR OUTSOURCING MACHINING OF COMPONENTS
  Patel, D.; Srikumaran, S.; Sivaloganathan, S.

• QUALITY AND PROTECTION OF DIFFERENT LEVELS OF TECHNICAL IDEAS
  Lloveras, J.

• OPTIMIZATION OF METAL FLANGE GASKETS FOR UNEVEN SURFACE PRESSURE DISTRIBUTION
  Prill, T.; Bertsche, B.

• A METHOD FOR THE CONSIDERATION OF INFLUENCES OF THE SURFACE ROUGHNESS ON THE BEHAVIOUR AND DESIGN OF GLOBAL SYSTEMS
  Albers, A.; Nowicki, L.; Minx, J.

• A PROTOTYPE SYSTEM TO SUPPORT CONCEPTUAL DESIGN SYNTHESIS FOR MULTI-X
  Rehman, F.; Yan, X.-T.

• APPLICATION OF ADVANCED LIGHTWEIGHT MATERIALS FOR OPTIMISATION OF FUNCTION AND WEIGHT IN VEHICLE PLATFORMS
  Blackert, P.; Compston, P.

• ANALYSIS AND MEASUREMENT OF INTERACTIONS IN REGIONAL INNOVATION SYSTEMS: NEED TO DEFINE NEW NETWORK INDICATORS
  Iturriagagoitia, J. M. Z.; Saez, F. J.; Gracia, A. G.

• DESIGN, TECHNOLOGY AND INNOVATION
  Lynch, G.; Fleming, D.

• A SHAPE DESIGN SUPPORT SYSTEM FOR SELF-EXPANDABLE STENTS
  Inoue, K.; Matsuoka, T.; Masuyama, T.; Ito, T.

• DESIGN PROCESS ASSESSMENT IN GLOBALLY COMPETITIVE PRODUCT DEVELOPMENT
  Ozawa, M.; Inoue, K.; Hirohata, K.

• DEVELOPMENT OF A COLLABORATIVE PRODUCT DEVELOPMENT TOOL FOR PLANTS DESIGN
  Germani, M.; Raffaeli, R.; Mandorli, F.; Bonaventura, L.

• MAKING PRODUCT DEVELOPMENT STUDIES INTERESTING TO FEMALE STUDENTS
  Aasland, K.

• A METHOD FOR SYSTEMATIC FUTURE PRODUCT CONCEPT GENERATION
  Sääskilahti, M. T.; Kuuva, M. H.; Leppimäki, S. M.

• A DESIGNER WORKBENCH WITH REAL-TIME CAPTURE AND REUSE OF INFORMATION ON PRODUCT EVOLUTION AND RATIONALE
  Chakrabarti, A.; Kota, S.; Rao, N.; Chowdary, S.

• ON USING THE DSM TECHNOLOGY APPROACH TO SYNERGY-BASED DESIGN OF INTERDISCIPLINARY SYSTEMS
  Kaljas, F.; Reedik, V.

• DESIGNING PRODUCT FAMILIES: EXPERIENCES OF FOUR NORWEGIAN MANUFACTURING COMPANIES
  Jensen, T.; Nilsson, C.

• ORIGINS AND PROSPECTS OF PLATFORM BASED PRODUCT PARADIGM
  Lehtonen, T.; Juuti, T.; Pulkkinen, A.; Roikola, A.-M.; Riitahuhta, A.

• PRODUCTION DEVELOPMENT AS LEADING DISCIPLINE IN THE DEVELOPMENT PROCESS
  Hilmes, R.; Lien, T. K.

• PERCEIVED VIEWS ON THE APPLICATION OF A KNOWLEDGE MANAGEMENT MODEL FOR PRODUCT DESIGN WITHIN A BRAZILIAN SME COMPANY
  Gouvinhas, R. P.; Costa, P. E. C.

• A WAY TO A RADICAL INNOVATION: A CASE STUDY
  Benedi?ci?c, J.; Žavbi, R.; Duhovnik, J.

• A FORMAL MODEL FOR THE REPRESENTATION OF PROBLEMS BASED ON TRIZ
  Sébastien, D.; Philippe, L.; François, R.; Emmanuel, C.

• INNOVATIVE, SUSTAINABLE INTEGRATED PRODUCT DESIGN MASTER PROGRAM IN DEVELOPMENT IN CO-OPERATION BETWEEN UNIVERSITY AND BUSINESS
  Schøyen, A. L.; Jakobsen, M. M.

• MORPHOLOGICAL ANALYSIS (MA) LEADING TO INNOVATIVE MECHANICAL DESIGN
  Dartnall, J.; Johnston, S.

• PRODUCT DEVELOPMENT PROCESSES – AN OPTIMIZATION OF DSM USING LEARNING RATES IN DESIGN LOOPS
  Rick, T.; Horváth, M.; Bercsey, T.

• DESIGN AS LEARNING
  Blanes, J. P.; Martínez, E. G.-S.

• THE USE OF RETROSPECTIVE FAILURE CASE STUDIES IN THE DEVELOPMENT OF A FATIGUE PREVENTION TECHNIQUE
  Darlington, J. F.; Booker, J. D.

• APPROACH TO A SYSTEMATIC METHODOLOGY FOR UNIVERSAL DESIGN – CONSIDERATION OF QUANTITATIVE USER DIVERSITY USING INTERVAL ARITHMETIC
  Murakami, T.; Deguchi, M.

• A TOOL FOR MODELLING FLEXIBLE PRODUCT STRUCTURES – MOFLEPS
  Maurer, M.; Boesch, N.-O.; Sheng, G.; Tzonev, B.

• DESIGN REPRESENTATIONS FOR MULTIPLE-VIEWPOINT ANALYSIS WITH A FOCUS ON CONCEPTUAL AIRCRAFT DESIGN
  Davies, D.; McMahon, C. A.

• METHODICAL APPROACH FOR PERFORMANCE RATING DURING THE DESIGN PROCESS OF PRECISION MACHINES
  Theska, R.; Frank, T.; Hackel, T.; Höhne, G.; Lotz, M.

• AN OUTSIDE-IN APPROACH FOR PRODUCT ARCHITECTURE AND DESIGN
  Culha, B.

• A SITUATED QUESTION-DRIVEN AND MODEL-BASED APPROACH TO DESIGN REASONING
  Sellgren, U.

• THE STRATEGY – DESIGN ALIGNMENT: WHICH COMMUNICATION SYSTEM TO ENHANCE STRATEGIC PERFORMANCE
  Bonnardel, S. M.

• ANALYZING AND IMPROVING METHODS USING EMAP ANALYSIS – ELEMENTARY METHOD ACTIVITIES FOR DESIGN PROCESS ANALYSIS
  Ernzer, M.; Birkhofer, H.

• THE IMPORTANCE OF THE INTEGRATION OF DESIGN METHODS IN ROBUST ENGINEERING DESIGN
  Jänsch, J.; Bruch, C.; Nissl, A.; Strasser, C.

• HOW COMPANIES LEARN FROM DESIGN FLAWS: RESULTS FROM AN EMPRICAL STUDY OF THE GERMAN MANUFACTURING INDUSTRY
  Gries, B.; Gericke, K.; Blessing, L.

• THE DEVELOPMENT OF DESIGN METHODS AND EXPERTISE
  Jänsch, J.; Birkhofer, H.; Walther, J.

• AN APPLICATION SPECIFIC MOTION SIMULATOR DESIGN METHODOLOGY
  Kasapis, C.; Burvill, C.; Field, B.

• DESIGN QUALITY PROCESS MANAGEMENT FOR IMPROVEMENT OF ENGINEERING DESIGN PERFORMANCE
  Yang, Q. Z.; Lu, W. F.; Ganesh, N.; Brombacher, A. C.

• A SOLUTION ORIENTED APPROACH TO REQUIREMENT IDENTIFICATION
  Chakrabarti, A.

• A MULTIDISCIPLINARY DESIGN TOOL WITH DOWNSTREAM PROCESSES EMBEDDED FOR CONCEPTUAL DESIGN AND EVALUATION
  Boart, P.; Nergård, H.; Sandberg, M.; Larsson, T.

• APPROACHES FOR THE SYNTHESIS OFTECHNICAL SYSTEMS WITHIN THE CONTACT AND CHANNEL MODEL C&CM
  Albers, A.; Burkardt, N.; Ohmer, M.

• SIMULATION-BASED DESIGN PRACTISE USED IN FINNISH MOBILE WORKING MACHINES INDUSTRY
  Riitahuhta, A.; Sääski, J.; Salonen, T.

• SPALTEN PROBLEM SOLVING METHODOLOGY IN THE PRODUCT DEVELOPMENT
  Albers, A.; Burkardt, N.; Meboldt, M.; Saak, M.

• IMPROVING THE DESIGN PROCESS BY INTEGRATING DESIGN ANALYSIS
  Eriksson, M.; Burman, Å.

• DESIGN PROCESS FOR DECISION MAKING CONCERNING THE ESTABLISHMENT OF THE (OBJECTIVE, ACTOR) COUPLE IN PROJECT MANAGEMENT ORGANIZATION
  Cardinal, J. S.-L.; Bocquet, J.-C.

• A METHOD FOR SUPPORTING CONCEPTUAL DESIGN PROCESS USING QUALITATIVE REPRESENTATION OF TEMPORAL AND SPATIAL RELATIONS
  Tsumaya, A.; Moritsu, R.; Wakamatsu, H.; Shirase, K.; Arai, E.

• MANAGING EARLY DESIGN PHASES IN SME’S: THE CONCEPT PRODUCT
  Delamarre, A.; Christofol, H.; Samier, H.; Richir, S.

• CONFLICT MANAGEMENT IN ENGINEERING DESIGN: INDUSTRIAL EVIDENCE FROM CO2MED SOFTWARE
  Lombard, M.; Rose, B.

• OPTIMISATION OF THE DESIGN PROCESS BY MEANS OF AVAILABILITY MODELLING
  Trost, M.; Bertsche, B.

• INCORPORATION OF RELIABILITY MANAGEMENT IN THE DESIGN PROCESS
  Delonga, M.; Bertsche, B.

• CONTRIBUTION TO AN OPTIMIZED DEVELOPMENT PROCESS FOR MODEL RANGE PRODUCTS CONSIDERING UNCERTAINTIES OF INFORMATION
  Hitziger, T.; Bertsche, B.

• THE NATURE OF THE LINKS BETWEEN DESIGN AND LEARNING
  Wu, Z.; Duffy, A.

• EFFECTIVE DESIGN PROJECT MANAGEMENT WITH A SPREADSHEET BASED APPROACH
  Ogot, M.; Okudan, G. E.; Mohammed, S.; Wu, X.

• ARE USERS NECESSARY FOR INCLUSIVE DESIGN?
  Cardoso, C.; Keates, S.; Clarkson, P. J.

• EXPERIENCES OF ENGINEERING DESIGN EDUCATION AT PAVIA UNIVERSITY
  Galli, G.; Guarneri, M.; Rovida, E.

• METHODOLOGY FOR THE EVALUATION OF THE FLOW OF INFORMATION IN THE PRODUCT DESIGN PROCESS
  Preiss, M.; Imelli, P.; Meier, M.

• STUDENT LEARNING STRATEGIES IN MECHANICAL ENGINEERING DESIGN
  Kanapathipillai, S.; Feng, N.; Magin, D.

• DESIGN CATALOGUES AS KNOWLEDGE MANAGEMENT AND EDUCATIONAL TOOLS IN MICROSYSTEM ENGINEERING DESIGN
  Garibay, J. A. L.; Binz, H.

• A NEW GUIDELINE TO DEVELOP A LECTURE – USING THE VDI 2221 FRAME – APPLIED ON A MECHATRONIC COURSE
  Bathelt, J.; Frey, U.; Fankhauser, M.; Jönsson, A.; Dierssen, S.; Meier, M.

• DESIGN COMMUNICATION IN INDUSTRY: A SURVEY ANALYSIS
  Grieb, J.; Lindemann, U.

• AN ARCHITECTURE FOR DESIGNERS’ SUPPORT SYSTEMS WITH KNOWLEDGE-EMBEDDED DOCUMENTS
  Takeda, H.; Yoshioka, M.; Shimomura, Y.; Fujimoto, Y.; Morimoto, K.; Oniki, W.

• PRODUCT ARCHITECTURE DESIGN PROCESS FOR MODEL-BASED KNOWLEDGE MANAGEMENT
  Nomaguchi, Y.; Fujita, K.

• DEVELOPING AN ENVIRONMENTALLY FRIENDLY VACUUM CLEANER – A CASE STUDY FROM VISION TO PROTOTYPE
  Großmann, J.; Oberender, C.; Birkhofer, H.

• COACHING STUDENTS INTO THE CONCEPT OF DESIGN ENGINEERING
  Grimheden, M.; Ritzén, S.; Andersson, S.

• COLLABORATIVE CURRICULUM DESIGN FOSTERS GRADUATES’ COMMUNICATION SKILLS
  Power, C.; Bohemia, E.; Farrell, H.; Yevenes, K.

• KNOWLEDGE SHARING CHALLENGES WITHIN THE EXTENDED ENTERPRISE
  Ericson, Å.; Nergård, H.; Larsson, T.

• THE TUTORENSYSTEM GARCHING: EDUCATION ON SOCIAL COMPETENCIES FOR ENGINEERING STUDENTS
  Nissl, A.; Ponn, J.; Lindemann, U.

• LEARNING PARTICIPATORY WORKSPACE DESIGN IN AN ENGINEERING DESIGN CURRICULUM
  Broberg, O.; Andreasen, M. M.

• DESIGNING DESIGNERS
  Reich, Y.; Kolberg, E.; Levin, I.

• ECODESIGN FUNCTION AND FORM – CLASSIFICATION OF ECODESIGN TOOLS ACCORDING TO THEIR FUNCTIONAL ASPECTS
  Navarro, T. G.; Rizo, S. C.; Ceca, M. J. B.; Ruiz, D. C.

• THE REQUIREMENTS FOR AGENT-BASED LEARNING SYSTEMS IN DESIGN
  Wu, Z.; Duffy, A.

• INTERNATIONAL ECODESIGN EDUCATION: PERSONALISED DESIGN KNOWLEDGE TRANSFER
  Diehl, J. C.; Brezet, J. C.

• INNOVATIVE ENGINEERING DESIGN EDUCATION
  Bilén, S. G.; Devon, R. F.

• RESULTS OF PRO-TEACH-NET – DEVELOPMENT AND EVALUATION OF AN E-LEARNING ENVIRONMENT
  Marosváry, Z.; Vajna, S.; Schabacker, M.

• DESIGN FOR MANUFACTURING AND INTEGRATION OF MICROELECTRO-MECHANICAL-SYSTEMS
  Watty, R.; Binz, H.

• A SPECIFIC DESIGN METHODOLOGY FOR MICRO-ELECTROMECHANICAL-SYSTEMS TO SUPPORT LIFELONG LEARNING
  Watty, R.; Binz, H.

• A LIGHTWEIGHT COLLABORATIVE TOOL TO SUPPORT DESIGN RESEARCH
  Salustri, F. A.

• MARGINS OF PERFORMANCE IN ENGINEERING: THE REQUIREMENT FOR A SYSTEMATIC APPROACH
  Snape, S.; Whittle, S.; Sen, P.; Rajabally, E.

• CLUSTERING ENGINEERING DESIGN RESEARCH: A METHODOLOGICAL FRAMEWORK
  Prudhomme, G.

• MECHATRONICAL DESIGN OF A HUMANOID ROBOT IN AN EDUCATIONAL PROJECT
  Albers, A.; Brudniok, S.

• E-DIP – A PROPOSAL FOR WEB-BASED COLLABORATION IN THE EARLY STAGES OF PRODUCT DESIGN
  Gomes-Ferreira, M. G.; Martins, T. H.; Amaral, D. C.; Forcellini, F. A.

• A DESIGN TOOL INTEGRATING CAD AND VIRTUAL MANUFACTURING FOR DISTORTION ASSESSMENT
  Sandberg, M.; Åström, P.; Larsson, T.; Näsström, M.

• AN EMPIRICAL STUDY OF REQUIREMENTS RELATED TO GENERIC PRODUCT STRUCTURES IN CAD-PDM INTEGRATION
  Sarinko, K.; Björkstrand, R.; Martio, A.

• QUALITY MANAGEMENT BY CONCURRENT COMPUTER AIDED TOLERANCE ANALYSIS AND FUNCTIONAL PROTOTYPING
  Makkonen, P.; Kuosmanen, P.; Münster, R.; Mäkeläinen, E.; Ramseier, Y.

• ONTOLOGY-BASED DESIGN KNOWLEDGE MODELING FOR PRODUCT RETRIEVAL
  Li, Z.; Anderson, D. C.; Ramani, K.

• SUPPORTING THE RAPID PRODUCT DEVELOPMENT REQUIRMENTS BY A VIABLE SOFTWARE ARCHITECTURE
  Stoyanov, E.; Dalakakis, S.; Roller, D.; Wischy, M.

• DESIGN OF NEW STRUCTURED WALL PIPES: PROBLEM FORMULATION
  Lichtlé, A.-S.; Meylheuc, L.; Caillaud, E.