Table of Contents

• Design Typology and Design Organisation
  Andreasen, M. M.; Wognum, N.; McAloone, T.

• Application of Methods from Social Sciences in Design Research
  Bender, B.; Reinicke, T.; Wünsche, T.; Blessing, L. T. M.

• Cleaning up Design Methods - Describing Methods Completely and Standardised
  Birkhofer, H.; Kloberdanz, H.; Berger, B.; Sauer, T.

• Design Education in the Information Age
  Broadbent, J.; Cross, N.

• Modular Products and Product Modularity - Implications for the Management of Innovation and for New Product Development
  Cantamessa, M.; Rafele, C.

• Building the Design Observatory: a Core Instrument for Design Research
  Carrizosa, K.; Eris, Ö.; Milne, A.; Mabogunje, A.

• Assessing Design Activity: Issues and Actions
  Cowdroy, R.; Williams, A.

• Informal Information in Engineering Design - a Classification
  Culley, S. J.; Allen, R. D.; Hicks, B. J.

• Radical Innovation and Design Research
  Eloranta, K. T.; Riitahuhta, A.; Karvinen, M.

• Using Bayesian Models in Preliminary Design
  Finger, S.; Pacheco, J.; Amon, C.

• Six Ingredients of Collaborative Virtual Design Environments
  Horváth, I.; Vergeest, J. S. M.; Rusák, Z.

• Product Architecture and the Propagation of Engineernig Change
  Jarratt, T.; Eckert, C.; Clarkson, P. J.; Schwankl, L.

• Flexible Adaptation of Methods within the Design Process
  Lindemann, U.

• On Knowledge Level Theories and the Knowledge Management of Designing
  Smithers, T.

• Approaches of Knowledge-Based Design
  Vajna, S.

• A Different View on PDM and its Future Potentials
  Weber, C.; Werner, H.; Deubel, T.

• A Software Tool for Observation and Analysis of Design Activity
  Bender, B.; Kammerer, U.; Pietzcker, F.; Blessing, L. T. M.; Hacker, W.

• Task Design and Task Analysis for Empirical Studies into Design Activity
  Bender, B.; Kammerer, U.; Pietzcker, F.; Blessing, L. T. M.; Hacker, W.

• An Approach to Verification and Evaluation of Early Conceptual Design Solutions
  Derelöv, M.

• Perspectives on Similarity in Design
  Eckert, C. M.; Earl, C. F.

• A Study of the Effects of Different Types of System Architecture on the Development Process
  Grante, C.; Bylund, N.

• An Analysis of Design Decision-Making in Industrial Practice
  Hansen, C. T.; Ahmed, S.

• Understanding the Phenomenon of Modularization
  Hansen, P. K.; Andreasen, M. M.; Harlou, U.; Gubi, E.; Mortensen, N. H.

• The Application of Design Management Theory to a Real Design Projects
  Hollins, B.

• Specialized Design Sciences - Questions for the Future
  Hubka, V.

• Product Modelling in Early Phases of the Design Process
  Korpela, T.

• Physual Designing - Approaching Design through the Interaction Space
  Kristensen, K.; Hildre, H. P.; Sivertsen, O. I.; Fyhn, H.; Storler, K.

• Simplifying the Design of Product Families Using a Segmented Design Network
  Lambeck, P.; Bertsche, B.; Lechner, G.

• Representation of an Architectural Design Process; Between Formal and Functional
  Leclercq, P. P.; Locus, M. E.

• Product Development Processes Ontology
  Mabogunje, A.; Hansen, P. K.; Eris, Ö.; Leifer, L.

• A Classification of Matrix-based Methods for Product Modeling
  Malmqvist, J.

• A Study on the Design Thinking Process With Difficult Keyword
  Nagai, Y.; Noguchi, H.

• A Study on the Thinking Path Model of Creative Design Process
  Noguchi, H.; Nagai, Y.

• Ethics in Industrial Product Design (Good, Goods and Gods)
  Özcan, A. C.

• Towards a Flexible and Adequate Use of Methods in Product Development
  Pulm, U.; Lindemann, U.

• Redesigning Product Programs Focusing On Variety, Complexity and Commonality
  Reitan, J.; Stormo, S.; Aasland, K.

• Development and Application of Modular Function Deployment
  Stadler, C.; Hosnedl, S.

• Strategic Design: a Design Method to Manage the Design Framework
  Taura, T.; Shiose, T.; Awaji, M.

• Including Sketching in Design Idea Generation Meetings
  van der Lugt, R.

• Context Indicators for Determining Links Between Design Ideas
  van der Lugt, R.; van der Graaf, A.

• From Function to Form Using Physical Reasoning
  Žavbi, R.; Hansen, C. T.

• A Concurrent Engineering Information Model Based on the STEP Standard and the Theory of Domains
  Aganovic, D.; Nielsen, J.; Fagerström, J.; Clausson, L.; Falkman, P.

• DAMOCIA-Design. An Experience of Design of Greenhouses Structures Modeling the Professional Knowledge with CommonKADS
  Bienvenido, J. F.; Flores-Parra, I. M.; Guirado, R.

• Modularisation of Knowledge - a New Approach in the Field of Product Innovation
  Birkhofer, H.; Berger, B.; Walter, S.

• Integrated Engineering Environment
  Bojcetic, N.; Štorga, M.; Marjanovic, D.

• Annotation and Knowledge Creation
  Boujut, J.-F.

• An Integrated System for Improving Lighting Design Strategy
  Chen, S. C.; Shih, S. C.; Chang, T. W.

• Aspects to the Coordination of Collaborative Design
  Cumming, M.

• Potentialites of Application of the Emerging Systems Engineering Standard AP233
  Düsing, C.

• The Creation of a Knowledge Sharing Culture for Effective Knowledge Management
  Hallam, J.; Hodges, B.; Tabeshfar, K.; Velay, X.

• Knowledge Management to Support Innovation Processes
  Hartlieb, E.; Leber, M.; Willfort, R.

• A Simulated Brain Model for Products' Creative Design
  He, W. P.; Cai, H. M.; Zhang, Y.

• Early Validation of a Design Method Based on Structured Reflection
  Ivashkov, M. Y.; van Overveld, C. W. A. M.

• Introducing Nucleus as a Modelling Entity for Product Design
  Jambak, M. I.; Horváth, I.; Akar, E.; Vergeest, J. S. M.

• Upgrading a CAD System with Expert System
  Kaiba, P.; Prebil, I.; Novak, A.

• Synthesis and Analysis Steps According Product Precision in Early and Later Development Stages
  Koch, M.; Hochmuth, R.; Meerkamm, H.

• Supporting the Early Stages of Product Design by Function-Based Tools
  Koch, M.; Meerkamm, H.

• Integrating Design Processes in an SE-Environment
  Longmuß, J.

• Decision Based Knowledge Management for Design Project of Innovative Products
  Longueville, B.; Stal Le Cardinal, J.; Bocquet, J.-C.

• A KBE System to Manage the Module Configuration Using the Corporate Knowledge
  Mandorli, F.; Berti, S.; Germani, M.

• Modelling the Relation Network in the Integrated Product and Design Process Model
  Pavkovic, N.; Bojcetic, N.; Marjanovic, D.

• Variant Design Based on Product Platform
  Pavlic, Davor; Pavkovic, Neven; Štorga, Mario

• Management of Different Types of Configuration Knowledge with the K- & V-Matrix and Wiki
  Puls, Ch.; Bongulielmi, L.; Henseler, P.; Meier, M.

• The Artificial Intelligence Application to the Analysis of the Constructive and Working Parameters of Plane Mechanism
  Sprecic, Denijal; Muftic, Osman; Janežic, Igor; Mujic, Elvedin

• Examples of an Expert System in the Estimation of the Quality of Lubricants
  Sprecic, Denijal; Sprecic, Elis; Vižintin, Jože; Sluga, Alojz

• A Study on the Characteristics of Product Color on the Internet - With an Emphasis on the Interaction Between the Expression of Product Color Information and Color
  Suk, H.-J.; Kwon, E.-S.

• Knowledge Technologies in Engineering Design
  Troxler, P.

• Transparency in Documents and Activities in Product and Process Development at Automotive Suppliers
  Vroom, R. W.; Verlinden, J. C.

• Overview of the Initiatives on the Development of Designer's Toolkits
  Vroom, R. W.; van Haarlem, L. F.; Ootes, F. P. A.

• Virtual Prototyping Simulation for the Design of Two-Wheeled Vehicles
  Barone, S.; Curcio, A.; Pierucci, F.

• New Surface Fitting Approach in Reverse Engineering of Sheet Metal Parts
  Campana, F.; Gerbino, S.; Renno, F.

• The Eraser Pen: A New Interaction Paradigm for Curve Sketching in 3D
  De Amicis, R.; Bruno, F.; Stork, A.; Luchi, M. L.

• Towards Context-Sensitive Modeling Tools
  Dumitrescu, R.; Vergeest, J. S. M.; Wiegers, T.; Wang, C.

• Surface Design in Virtual Reality as Industrial Application
  Fiorentino, M.; de Amicis, R.; Stork, A.; Monno, G.

• A Feature Based Approach for Conceptual Design
  Golob, B.; Jezernik, A.; Hren, G.

• A Methodology Supporting the Preparation of 3D-CAD Data for Design Reviews in VR
  Graf, H.; Brunetti, G.; Stork, A.

• Simulation on Multiple Dimensions for the Evaluation of New Designs. A Practical Experience
  Guirado, R.; Bienvenido, J. F.; Flores-Parra, I. M.

• Assembly Configuration and Appearance Changes in VRML Environment
  Jezernik, A.; Hren, G.; Golob, B.

• Digital Space Design with the Applicable Database of Interactive Avatar Behavior
  Ku, B.-C.; Kim, Y.-S.; Lee, B.-C.

• Interdisciplinary Methods and Tools for the Design of Mechatronic Products
  Kleiner, S.; Anderl, R.

• Colibri - A Collaborative Design System for Product Data Integration
  Kleiner, S.; Anderl, R.; Gräb, R.

• Design and Evaluation of Metal Construction Manufacturing System
  Lerher, T.; Potrc, I.; Kramberger, J.; Šraml, M.

• An Interface Specification for Principle Solutions Supporting the Cross-Domain Design of Mechatronic Systems
  Möhringer, S.; Gausemeier, J.

• New Generation Computer-Aided Design Tools: Two Related Research Projects Investigating the Future Expectations of Designers
  Sener, B.; Vergeest, J. S. M.; Akar, E.

• Towards 'Virtual Clay' Modelling - Challenges and Recommendations: A Brief Summary of the Literature
  Sener, B.; Wormald, P.; Campbell, I.

• Information Management for Multi-Technology Products
  Svensson, D.; Crnkovic, I.

• Real Experiences of Virtual Worlds
  Ucelli, G.; Conti, G.; Petric, J.; Maver, T. W.

• Snapshots and Bookmarks as a Graphical Design History
  Verlinden, J. C.; Igarashi, T.; Vergeest, J. S. M.

• Freeform Shape Manipulation Using Context-Dependent Constraints and Parameters
  Wiegers, T.; Dumitrescu, R.; Vergeest, J. S. M.

• Modelling of Means in Conceptual Design
  Wilhelms, S.

• Part Based Product Upgrade
  Žavbi, R.

• From Business to Buttons
  Balic, M.; Berndtsson, J.; Ottersten, I.; Aldman, M.

• Expert Procedures Implementation in Software Catalogues
  Baragetti, S.; Rovida, E.

• Exemplary Applications of the Reverse-Engineering Method in the Process of Extending Service Lives of Aircraft in Operation in the Polish Air Forces
  Barszcz, P.; Borgon, J.; Leski, A.; Niezgoda, T.

• A Design Process for Complex Mechanical Structures Using Property Based Models, with Application to Car Bodies
  Bylund, N.; Fredericson, H.; Thompson, G.

• A Review of Product Development Performance Metrics Investigations with Emphasis on the Designer Level
  Acosta, C. L. M.; Araújo, C. S.; Trabassos, L. G.

• Bottom Structure For DutchEVO Car: Formulation Of The Problem And The Adjustment Of The Optimization System
  Ermolaeva, N. S.; Kaveline, K. G.; Spoormaker, J. L.

• Identifying the Best Overall Solution by Team Based Evaluation and Decision Tactics in Conceptual Design
  Graessler, I.

• Modularity and Distributed Product Development
  Hansen, P. K.; Gubi, E.; Hansen, B. G.

• Application of ICDM for the Conceptual Design of a New Product
  Hari, A.; Herscovitz, J.; Zonnenshain, A.; Weiss, M. P.

• Safe Steering Wheel Airbag Removal Using Active Disassembly
  Jones, N.; Harrison, D.; Chiodo, J.; Billett, E.

• Application of Damage Model for Numerical Determination of Carrying Capacity of Large Rolling Bearings
  Kunc, R.; Prebil, I.; Rodic, T.; Korelc, J.

• Numerical Simulation to Study the Influence of the Thickness of Canopy at a Bird Strike
  Leski, A.; Baraniecki, R.; Malachowski, J.

• The Innovation-Styling Spectrum: Factors Constraining the Design Ambition of UK SMEs
  Moultrie, J.; Fraser, P.; Clarkson, P. J.

• Concurrent Decision Making for High-Tech Products and Supply Systems
  Sahlin, M.; Fagerström, J.; Clausson, L.; Aganovic, D.; Sohlenius, G.

• Finding Tomorrow Today
  Samperi, J.; Hollins, B.; Holdway, R.

• Increasing Load Capacity of Splines due to Design
  Schäfer, G.; Garzke, M.

• Designing 2D and 3D Textiles Using Yarn Engineering and VR
  Stjepanovic, Zoran; Jezernik, Anton

• Vibration Analysis of Vacuum Cleaner Motors
  Tavcar, J.; Duhovnik, J.

• Developing Doublecurved Architectural Glass
  Vollers, K. J.

• Envisioning Design @ Home
  Baillie, L.; Benyon, D. R.

• Communicating Engineering Design - A Critical Success Factor in Projects
  Baumgärtner, C. E.

• A Guided Surgical Drilling Method
  Caccamo, E.; Capello, F.; Lombardo, E.; Mancuso, A.; Petrucci, G.

• Mathematical Models for Determination of the Values of External Dynamic Inertia Moments of Driver's Hand while Operating a Vehicle
  Dacic, S.; Filipovic, I.; Milcic, D.

• The Significance of Contact Pressure Distribution on the Soft Tissue by Men Sitting
  Ergic, T.; Ivandic, Ž.; Kozak, D.

• Design as a Collaborative Process: A Systematic and Constructive Model for Developing Play Material for Blind/Visually Impaired Pre-School Children
  Evyapan, N. A. G. Z.

• Quality Improvement in the Design of Mechanical Systems
  Fargnoli, M.; Pighini, U.

• The Evaluation of Costs Related to Safety of Mechanical Systems in Design Stages
  Fargnoli, M.; Pighini, U.

• Context Modeling in a Collaborative Virtual Reality Application as Support to the Design Process
  García, J.; Restrepo, J.

• Designers' Involvement in Designing
  Glock, F.

• E-map. Investigating Methods for Mapping Experiences
  Grundy, C.; Crossley, L.

• Towards A Designer Working Culture That Encourages Sleep And Dreaming
  Hilton, K. H.

• Office Furniture Design According to a Human Anthropometric Data
  Ivelic, Ž.; Grbac, I.; Ljuljka, B.; Tkalec, S.

• Trajectory of the Human Body Mass Centre During Walking at Different Speed
  Jurcevic Lulic, T.; Muftic, O.

• Forming a Base for a Manufacturing System Design and Evaluation Method
  Karlsson, A.

• Three-Dimensional Modelling of Solid-Fluid Interaction as a Design Tool in Screw Compressors
  Kovacevic, Ahmed; Stošic, Nikola; Smith, Ian K.

• Model Generation and Application in Medical Domain
  Krek, J.; Duhovnik, J.

• Facilitating Creativity and Shared Understanding in Design Teams
  Lauche, K.

• Managing Uncertainty in the Design and Development Process by Appropriate Methods Selection
  López-Mesa, B.; Thompson, G.; Williander, M.

• The Influences of Organisation on Leadership in the Design Process: Results of an Investigation in Five Industrial Companies
  Lüdcke, R.; Birkhofer, H.

• The Importance of Corporate Culture in Collaborative Product Design
  Marxt, C.

• Participative Laboratories for the Co-Production of Public Space: Redefinition of Social Meaning
  Michialino, P.; Cowdroy, R.

• Using Finite Elements Model of the Human Body for Shape Optimization of Seats: Optimization Material Properties
  Moes, N. C. C. M.; Horváth, I.

• Design of Digital Graphic System
  Nježic, Zoran; Žiljak, Vilko; Pap, Klaudio

• On a Hip Joint Simulator Electric Actuators Integrated Design and Optimization
  Pellicciari, M.; Barbanti, G.; Andrisano, A.O.

• Terms and Measures for Styling Properties
  Podehl, G.

• Structured Reflection for Improving Design Processes
  Reymen, I. M. M. J.; Hammer, D. K.

• Colour in Technical Presentation
  Salamon, V.; Žiha, K.

• Invisible Niche: (Re)Considering Cultural and Social Factors in Design
  Siu, K. W. M.

• Some Problems of Unreliability and Hazard in Technical Objects
  Smalko, Z.; Jazwinski, J.; Zurek, J.

• Designing and Discrete Production of Office Furniture in CIM Systems
  Smardzewski, J.; Dziegielewski, S.; Gawronski, T.

• Integrated Design in the Operating Room: Review and Analysis of Medical Product Development
  Smith, S. L.; Mockford, R. A.; Young, R. A.

• Haunting Space - The Role of the Body in Design Interaction
  Smyth, M.

• Microtext Design for Digital Printing Techniques
  Svilicic, B.; Žiljak, J.; Žiljak, I.; Moric, M.

• The Role of the Designer in the Innovation Process: Experience of a Large Supermarket Chain
  Tacla, I.; Divry, C.; Sainz, C.; Magnon, L.

• Collaborative Engineering: 'Towards Design Guidelines for Risk Management in Distributed Software Development'
  van Grinsven, J.; de Vreede, G.-J.

• How Designers Communicate Ideas to Each Other in Design Meetings
  Williams, A.; Cowdroy, R.

• Knowledge Management in Educational Engineering Design Projects
  Bender, B.; Longmuß, J.

• Design and Mechanical Engineering: How Good is the Link?
  Bereznitski, A.

• Introducing IT in Teaching the Engineering Design Graphics at the Faculty of Graphic Arts, University of Zagreb, Croatia
  Bjelovučić Kopilović, S.; Jokić, T.; Kropar-Vančina, V.

• Education for Engineering and Designing
  Eder, W. E.

• Learning Processes in Group Designing
  Ertsen, M. W.

• Learning and Practicing Basic Design Concepts. A Knowledge Model
  Flores-Parra, I. M.; Guirado, R.; Bienvenido, J. F.

• The Impact of CAD Technologies on Engineer's Education
  Galeta, T.; Kljajin, M.; Majdandžic, N.

• Short Term Workshop: An Alternative Strategy in Architectural Design Education
  Kahvecioglu, H. L.; Erdem, A.; Paker-Kahveicoglu, N.

• Inclusive Design - Review of Student Projects
  Kapetanovic, Zlatko; Horvat, Sanja; Lapaine, Božidar; Orešic, Mladen

• Simulating Design for Production: The University of Botswana Experience
  Khumomotse, S. M.; M'Rithaa, M. K.

• Effeciency of Design Studies in Zagreb
  Lapaine, B.; Kapetanovic, Z.

• Conversations on Interaction: Exploring the Interplay Between Theory, Research and Practice in Design Education
  Power, N.

• Design of Axial Pin Connections for Torque Transmission
  Birkholz, H.

• On the Design of a Low-Cost Racing Car Chassis
  Chignola, S.; Gadola, M.; Leoni, L.; Resentera, M.

• MATLAB/Simulink Package as a Environment for Rail Vehicle Simulation Study
  Chudzikiewicz, A.

• Gear Pump Design: Optimization for Delivery Increas
  Di Francesco, G.; Marini, S.

• Optimization of Injection Law at Modern Diesel Fuel Supply Systems
  Filipovic, I.; Pikula, B.

• The Electronic Control Ignition and Fuel Injection System for Formula Student Racer Engine
  Kegl, B.; Pehan, S.

• Fatigue Damage and New Design of Gantry Crane Equalizer Beam
  Krstulovic, A.; Matic, T.

• Design of a Man-Machine Interface for a Pneumo-Hydraulic Control Console for an Underwater Platform
  Kumar, P.; Chaturvedi, S. K.

• Analysis of the Tooth Root Stress in High Transverse Contact Ratio Involute Gearing
  Lovrin, N.; Križan, B.

• Design and Modification of Water-Stabilized Plasma Generator
  Moravec, J.; Hrabovsky, M.; Matas, R.

• Selection of Dynamics Characteristics for Landing Gear with the Use of Numerical Model
  Niezgoda, T.; Malachowski, J.; Kowalski, W.

• Influence of the Hoisting Drum Winding System on the End Plate Loads
  Otto, S.; Mupende, I.; Dietz, P.

• Energy Losses Due to Friction in Gears
  Palaghian, L.; Bucsa, M.; Barsan, I.

• Computer Aided Design of Feed Drives for CNC Machine Tools
  Pandilov, Z.; Dukovski, V.

• Aerodynamics Aspects of Formula S Racing Car
  Pehan, S.; Kegl, B.

• Maintenance Awareness in Gear-Box Design
  Ulaga, S.; Tašner, B.; Belšak, A.; Flašker, J.

• Vehicle Dynamics Simulation Part 2: Presenting the Simulated Vehicle Dynamics in Virtual 3D Environment
  Ambrož, M.; Ciglarič, I.; Prebil, I.

• Straightening Process Modelling of Steam Turbine Rotors Applying Tension Relaxation Method
  Avdic, M.; Arnautovic, A.; Suljkanovic, M.; Karic, A.

• Vehicle Dynamics Simulation, Part 1: Mathematical Model
  Ciglarič, Iztok; Prebil, Ivan

• Tolerance Design of the Journal-Bearing Kinematic Joint. Numerical Analysis of the Effect of the Shape Variations on the Performances
  Di Gironimo, G.; Lanzotti, A.; Patalano, S.; Russo, R.

• Fatigue Failures in Industry - Case Studies
  Domazet, Ž.; Piršic, T.

• Numerical Simulation of Micro-Pitting on Gears
  Fajdiga, G.; Flašker, J.; Glodež, S.

• Theoretical Improvement of the Planetary Gear Dynamic Model
  Geramitcioski, T.; Trajcevski, Lj.

• Damage Tolerant Design of the Aircraft Components
  Jelaska, D.; Podrug, S.; Grljušic, M.; Glodež, S.

• Grid Generation in Complex Computational Domains with the Use of Subdivision Templates
  Kolšek, T.; Duhovnik, J.

• A System for Footwear Fitting Analysis
  Kos, L.; Duhovnik, J.

• Prediction of 3-D Crack Growth in Thin Rim-Gears
  Kramberger, J.; Potrc, I.; Flašker, J.

• Four-Bar Linkage Design Using Global Optimization Approach
  Krašna, S.; Ciglaric, I.; Prebil, I.

• Analytical and Numerical Analysis of Non-Symmetrical All Steel Sandwich Panels Under Uniform Pressure Load
  Kujala, P.; Klanac, A.

• Optimization of Die-Bonding Process Using Orthogonal Array Experiments
  Lai, R.-J.; Lin, Y.-C.; Kuo, T.-W.; Chou, S.-Y.

• Optimum Design of a Formula One Rear Wing Using a Genetic Algorithm
  Muzzupappa, M.; Pagnotta, L.

• Using of 3-D Parametrical Blocking Contours for Optimizing External Cylindrical Gear Drives on a "Geometrical Level"
  Nenov, P.; Anguelova, A.; Kaloyanov, B.

• Dynamics of Motorcycle Using Flexible Elements
  Oliveri, S. M.; Cale, M.; Catalano, L.

• On Formulas and Methods for Expressing the Attitude of a Rigid Body
  Pezzuti, E.; Valentini, P. P.

• Numerical Computation of Stresses, Strains and Displacements in the Thin Plates in Plastic Range
  Pustaic, D.

• Impact Damage Analysis of Layered Composite Plates
  Smojver, I.; Soric, J.

• Numerical Approach for Fatigue Initiation Service Life of Mechanical Elements
  Šraml, M.; Potrč, I.; Flašker, J.

• Design Science for Mathematical Modelling of Gear Systems
  Vanek, V.; Nemec, L.; Hosnedl, S.

• Numerical Analysis of non Linear Thermosensible Viscoelastic Systems
  Vetturi, D.; Magalini, A.; Ramorino, G.

• Numerical Analyses of Mixed Mode Crack Propagation Using Virtual Crack Extension Method
  Zafošnik, B.; Ulbin, M.; Flašker, J.

• Operating Bolt Load Calculation in Joints of Complex Elastic Structures
  Zupan, S.; Prebil, I.

• Environmental Assessment - Gotten Across to Industrial Designers
  Bey, N.

• Multiple Environmental Benchmark Data Supporting Ecodesign in Both Industry and Academia
  Boks, C.; Stevels, A.

• Selecting Methods for Life Cycle Design Based on the Needs of a Company
  Ernzer, M.; Birkhofer, H.

• An Ecodesign Method for Product Architecture Definition Based on Optimal Life-Cycle Strategies
  Giudice, F.; La Rosa, G.; Risitano, A.

• An Approach for a Recycling Oriented Product Design
  Hesselbach, J.; Herrmann, C.; Mateika, M.

• The Guideline "Design for Upgrading" as a Medium for Sustainable Design
  Lindemann, U.; Mörtl, M.; Hessling, T.; Hutterer, P.

• Environmentally Sound Product Improvements of Consumer Products
  Lo, V.; Wimmer, W.

• Creating Sustainable Students Through Project-Based Teaching
  McAloone, T. C.

• An Integrated Procedure for the Design of Sustainable Products
  Pighini, U.; Fargnoli, M.; Accinni, S.

• The Application of the ECODESIGN PILOT and Methodical Support for the Implementation of ECODESIGN in Products
  Wimmer, W.; Züst, R.; Strasser Ch.