Table of Contents

• COLLABORATIVE DISTRIBUTED PRODUCT DEVELOPMENT: THREAT OR OPPORTUNITY FOR SWEDISH SMES?
  Gullander, S.; Öhrwall Rönnbäck, A.

• Conference Organizing Team
  Folkeson, A.; Gralen, K.; Norell, M.; Sellgren, U.

• PREFACE
  Folkeson, A.; Gralen, K.; Norell, M.; Sellgren, U.

• THE DESIGN SOCIETY
  Folkeson, A.; Gralen, K.; Norell, M.; Sellgren, U.

• RESPECT DESIGN OR EXPECT DISASTER!
  Hales, C.

• ENGINEERING DESIGN - THEORY AND PRACTICE
  Fredriksson, B.

• WHAT IS THIS THING CALLED DESIGN RESEARCH?
  Blessing, L.

• DRIVE-BY-WIRE BY SKF
  Hollweg, E; Zingariello, F

• DEMANDS FOR SUSTAINABLE DEVELOPMENT
  McAloone, T

• MODULAR MULTIFUNCTIONAL DESIGN TOOL FOR SPRING UNITS
  Schorcht, H-J; Wittkopp, T.; Micke, D.

• A GENERAL FRAMEWORK FOR AUTOMATED CONCEPTUAL DESIGN OF ONE DOF MECHANISMS
  Wahl, J-C; Sartor, M.; Paredes, M.

• THE DIRECTOOL SOFTWARE - TOOL DESIGN ON FACET GEOMETRIES WITH DECISION SUPPORT
  Müller, D. H.; Aumund-Kopp, C.; Weitzel, R.; Selk, A.

• DEVELOPING A NEW GENERATION OF POSITIONING AND MEASURING MACHINES BY MEANS OF VIRTUAL PROTOTYPING
  Höhne, G.; Lotz, M.; Theska, R.; Brix, T.; Frank, T.; Hackel, T.

• CONCEPTUAL DESIGN OF PLASTIC INJECTION MOLDED COMPONENTS
  Ogliari, A.; Back, N.

• DESIGN METHODOLOGY IN MICRO TECHNOLOGY
  Albers, A.; Marz, J.; Burkardt, N.

• OPTIMAL DESIGN OF A LIGHTWEIGHT SHAPE MEMORY ALLOY ACTUATOR
  Han, L. H.; Lu, T. J.; Evans, A. G.

• CABLING DESIGN UTILIZING 3D CAD IN PRODUCT DEVELOPMENT OF AN ELECTRIC DEVICE
  Lindfors, N.; Pesonen, A.; Franck, C.; Lähteinen, V.; Kuosmanen, P.

• A METHOD FOR MODELING AND SIMULATION OF JOINT DRIVER-VEHICLE PERFORMANCE AT VEHICLE HANDLING LIMITS
  Caldenfors, D.

• RESEARCH ON DESIGN REFLECTION: OVERVIEW AND DIRECTIONS
  Reymen, I. M. M. J.

• KNOWLEDGE MANAGEMENT AND LEARNING CULTURE IN DISTRIBUTED ENGINEERING
  Troxler, P.; Lauche, K.

• ENGINEERING MANAGEMENT FOR INTEGRATION
  Engwall, M.; Forslin, J.; Kaulio, M.; Norell, M.; Ritzén, S.

• BARRIERS TO SHARED UNDERSTANDING IN COLLABORATIVE DESIGN PROJECTS
  Kleinsmann, M.; Valkenburg, R.

• SEVEN STEPS TO THE VOICE OF THE CUSTOMER
  Vanalli, S.; Cziulik, C.

• A PROPOSAL FOR AN ENHANCED DESIGN CONCEPT UNDERSTANDING
  Thorp Hansen, C.; Myrup Andreasen, M.

• ASSESSING INCLUSIVITY THROUGHOUT THE DESIGN PROCESS
  Cardoso, C.; Keates, S.; Clarkson, P. J.

• UTILIZATION OF SCENARIO BUILDING IN THE TECHNICAL PROCESS
  Janhager, J.

• DESCRIBING SOLUTIONS FOR THE CONCEPTUAL PHASE - STRUCTURED AND USER-ORIENTED
  Sauer, T.; Kloberdanz, H.; Walter, S.; Berger, B.; Birkhofer, H.

• NUCLEUS-BASED PRODUCT CONCEPTUALIZATION - PRINCIPLES AND FORMALIZATION
  Horváth, I.; van der Vegte, W.

• TOWARDS A FRAMEWORK FOR AGENT-BASED PRODUCT MODELLING
  Gero, J. S.; Kannengiesser, U.

• ORGANIZING KNOWLEDGE ABOUT FUNCTIONAL DECOMPOSITION
  Kitamura, Y.; Mizoguchi, R.

• SOLID MODELLING WITH DIMENSIONAL AND TOPOLOGICAL VARIABILITY
  Cederfeldt, M.; Sunnersjö, S.

• INFLUENCES OF THE REPRESENTATIONS ON DESIGNING AND IMPLICATIONS FOR COMPUTER-BASED DESIGN SYNTHESIS
  Mulet, E.; Vidal, R.; Bermell-García, P.

• DESIGN REQUIREMENTS: CONDITIONERS OR CONDITIONED?
  Restrepo, J.; Christiaans, H.

• EXPLORING REQUIREMENTS MANAGEMENT IN THE AUTOMOTIVE INDUSTRY
  Almefelt, L.; Andersson, F.; Nilsson, P.; Malmqvist, J.

• REQUIREMENTS CAPTURE FOR MEDICAL DEVICE DESIGN
  Ward, J.; Shefelbine, S.; Clarkson, P. J.

• CAPTURING PRODUCT REQUIREMENTS INTO THE TRANSFORMATION MODEL OF A TECHNICAL PROCESS BY USING UML
  Korpela, T.

• REAL-TIME CO-ORDINATED RESOURCE MANAGEMENT IN A COMPUTATIONAL ENVIRONMENT
  Coates, G.; Duffy, A. H. B.; Whitfield, R. I.; Hills, W.

• PARAMETER TRAILS
  Flanagan, T. L.; Eckert, C. M.; Clarkson, P. J.

• CHARACTERIZING ORGANIZATIONAL LEARNING OVER MULTIPLE PRODUCT GENERATIONS THROUGH ANALYSIS OF PRODUCT DFA METRICS
  Takala, R.; Lindfors, N.; Lähteinen, V.

• IDENTIFICATION OF A CRITICAL LEVEL OF COOPERATION IN A COOPERATIVE - COMPETITIVE RELATIONSHIP
  Lovén, E.; Krus, P.

• A FRACTAL ORGANISATION APPROACH FOR CONCURRENT DESIGN
  Ostrosi, E.; Tautrim, J.; Ferney, M.; Garro, O.

• A CASE STUDY OF THE IMPACTS OF PRELIMINARY DESIGN DATA EXCHANGE ON NETWORKED PRODUCT DEVELOPMENT PROJECT CONTROLLABILITY
  Borgman, J.; Sulonen, R.

• A FRAMEWORK FOR ASSESSING INTER-ORGANISATIONAL KNOWLEDGE MANAGEMENT IN NEW PRODUCT DEVELOPMENT
  Wunram, M.; Weber, F.; Müller, D. H.; Pawar, K. S.; Gupta, A.

• A CAD SYSTEM WITH THE ABILITY TO RECORD DESIGNER’S NOTES AND DECISION-MAKING BASES FOR REUSE
  Inoue, K.; Yamanaka, M.; Lee, C-S

• EIGHT BASIC LEAN PRODUCT DEVELOPMENT TOOLS
  Gershenson, J. K.; Pavnaskar, S. J.

• FROM DESIGN PROCESS SPECIFICATION TOWARDS PDM WORKFLOW CONFIGURATION
  Nowak, P.; Merlo, C.; Eynard, B.; Gallet, T.

• WORKFLOW ARCHITECTURE FOR A DISPERSED AUTOMOTIVE DEVELOPMENT NETWORK
  Kristjansson, A. H.; Kristensen, K.; Hildre, H. P.

• THE REALITY OF DESIGN PROCESS PLANNING
  Eckert, C. M.; Clarkson, P. J.

• MANAGING INDUSTRIAL PRODUCTS OF DIFFERENT DEVELOPMENTAL STAGES
  Suistoranta, S.

• MULTIPROJECT MANAGEMENT FROM A PRACTITIONERS POINT OF VIEW
  Pilemalm, J.; Velin, M.

• PRIORITIZING R&D-PROJECTS IN A STUCTURED WAY - BASED ON THE EXAMPLE OF THE AUTOMOTIVE SUPPLIER INDUSTRY
  Baumgärtner, C.

• INFORMATION DEMANDS OF DESIGN MANAGERS IN AUTOMOTIVE INDUSTRY
  Stetter, R.

• TELEGENESIS: CROSS-LESSONS ON MANAGING DISTRIBUTED DESIGN ACROSS THREE SECTORS
  Edum-Fotwe, F. T.; Wootton, A. B.; Gregory, M. J.; Thorpe, A.; Cooper, R.; Deasley, P. J.

• INNOVATION THROUGH EXPLORATIVE THINKING IN PRODUCT DEVELOPMENT PROJECTS
  Sundström, P.; Zika-Viktorsson, A.

• INNOVATION IMPACT MAP: AN OPPORTUNITY EVALUATION TOOL
  Feland, J. M.

• SEVERAL DIMENSIONS FOR CHARACTERIZING INNOVATION: A TECHNICAL AND AN ECONOMICAL APPROACH
  Roucoules, L.; Lutz, P.; Gartiser, A. N.

• A NEW APPROACH OF INNOVATIVE DESIGN : AN INTRODUCTION TO C-K THEORY.
  Hatchuel, A.; Weil, B.

• DEVELOPING COGNITIVE CAPABILITY SCALES FOR INCLUSIVE PRODUCT DESIGN
  Langdon, P.; Keates, S.; Clarkson, P. J.

• MASS CUSTOMISATION, CHANGE AND INSPIRATION - CHANGING DESIGNS TO MEET NEW NEEDS
  Eckert, C. M.; Pulm, U.; Jarratt, T. A. W.

• STUDY ON SUBJECTIVE EVALUATION OF PERCEIVED QUALITY OF FLAP MOBILE PHONES AND PREDICTION OF SENSORIAL PROFILE
  Martín López, J.; Guenand, A.

• USABILITY CONSIDERATIONS IN THE DESIGN OF HANDHELD ELECTRONIC DEVICES
  Gupta, S. P.; Keates, S.; Clarkson, P. J.

• BUSINESSPLAN APPROACH FOR NEW PRODUCTS
  Hesselbach, J.; Broistedt, K-H; Lieu, D. K.; Mateika, M.

• PRODUCT INFORMATION BACKFLOW USING MOBILE AND INTERNET-RELATED APPLICATIONS
  Mueller, J. W.

• USING PRODUCT ARCHITECTURE-BASED METHODS TO GET SMART IN THE BATTLEFIELD
  Stock, M. E.; Bohm, M. R.; Stone, R. B.; Hubing, N. E.

• SKETCHING A STRATEGY: EARLY DESIGN IN DIFFERENT INDUSTRIAL SECTORS
  Lauche, K.

• UNDERSTANDING AND PROTECTING VALUE IN NEW PRODUCT DEVELOPMENT
  Cagan, J.; Vogel, C. M.

• DIGITAL FREE-HAND SKETCHING IN 3D - A TOOL FOR EARLY DESIGN PHASES
  Müller, F.; Pache, M.; Lindemann, U.

• GARSKETCH3D: A SKETCH-BASED 3D APPAREL PRODUCT MODELLING PLATFORM
  Wang, CCL; Wang, Y.; Yuen, M. M. F.

• A NOVEL UPDATING MODELLING METHODOLOGY FOR FREE-FORM SURFACE MODIFICATIONS IN EARLY STAGES OF DESIGN
  Prieto, P. A.; Wright, D. K.; Qin, S. F.

• CHARACTER LINE SCKETCHING FOR CONCEPTUAL DESIGN IN VIRTUAL REALITY
  Fiorentino, M.; Monno, G.; Renzulli, P. A.; Uva, A. E.

• CONCEPTUAL MODELING TOOL AT THE EARLY DESIGN PHASE
  Naya, F.; Contero, M.; Jorge, J.; Conesa, J.

• THE IDENTITY OF FREEFORM SHAPE FEATURES
  Wang, C.; Vergeest, J. S. M.; Bronsvoort, W. F.

• WHY CAD TOOLS BENEFIT FROM A SKETCHING LANGUAGE
  Borg, J. C.; Farrugia, P.; Camilleri, K. P.; Giannini, F.; Yan, X. T.; Scicluna, D.

• DEFINING SIMILARITY BETWEEN DESIGN CONCEPT SKETCHES BASED ON PHYSICAL QUANTITY AND GEOMETRY
  Murakami, T.; Usui, M.

• SOS - SUBJECTIVE OBJECTIVE SYSTEM FOR GE NERATING OPTIMAL PRODUCT CONCEPTS
  Ziv-Av, A.; Reich, Y.

• AN INNOVATIVE NEW BASIC MODEL IN DESIGN METHODOLOGY FOR ANALYSIS AND SYNTHESIS OF TECHNICAL SYSTEMS
  Albers, A.; Matthiesen, S.; Ohmer, M.

• A METHODOLOGY TO SUPPORT DESIGNER CREATIVITY DURING THE CONCEPTUAL DESIGN PHASE OF INDUSTRIAL PRODUCTS
  Bruno, F.; Giampà, F.; Muzzupappa, M.; Rizzuti, S.

• A PRE-TENDER ADVISORY SYSTEM: DESIGN REUSE FOR THE CONCEPTUAL DESIGN OF LARGE, MADE-TO-ORDER, CONCEPTUALLY STATIC PRODUCTS
  Kahangamage, U.; Barr, G.; Burgess, S.; Williams, J. S.

• MODULARISATION OF MECHATRONIC MECHANISMS WITH DEPENDENT DEGREES OF FREEDOM
  Möller, B.; Andersson, S.; Wikander, J.

• THE DATABASE “METHODOS” ASSISTS AN EFFECTIVE APPLICATION OF DESIGN METHODS
  Franke, H-J; Löffler, S.; Deimel, M.

• TOWARDS A MEASURE FOR ASSESSING CREATIVE INFLUENCES OF A CREATIVITY TECHNIQUE
  Chakrabarti, A

• A MEASURE FOR ASSESSING PRODUCT NOVELTY
  Chakrabarti, A.; Khadilkar, P.

• A NEW APPROACH FOR THE GENERATION OF INNOVATIVE CONCEPT FOR PRODUCT DESIGN
  Ngassa, A.; Bigand, M.; Yim, P.

• PRIORITY MATRIX TO REDUCE MATERIAL CONSUMPTION DURING REDESIGN PROCESS
  Cziulik, C.; Vianna, A. C.; Macedo, L. M.

• DEVELOPMENT OF A MODEL FOR ASSESSMENT OF DESIGN PROCESS PERFORMANCE
  Perez, R. L.; Ogliari, A.; Back, N.; Martins, R. A.

• DESIGN PROCESS PERFORMANCE MANAGEMENT SUPPORT
  Haffey, M. K. D.; Duffy, A. H. B.

• IMPLEMENTATION OF THE PHASE REVIEW PROCESS IN THE NEW PRODUCT DEVELOPMENT: A SUCCESSFUL EXPERIENCE
  Valeri, S. G.; Santiago, M. P.; Campello, A. D. C.; Resende, H. B.; Trabasso, L. G.

• ANALYSIS OF THE BALANCED SCORECARD FORMULATION PROCESS FOR SETTING UP ENGINEERING DESIGN PERFORMANCE METRICS
  Acosta, L. M. C.; Trabasso, L. G.; Araújo, C. S.

• THE AESTHETIC AND PERCEIVED ATTRIBUTES OF PRODUCTS
  Johnson, K. W.; Lenau, T.; Ashby, M. F.

• CAPTURING THE ESSENCE OF A PRODUCT’S BRAND THROUGH A SHAPE GRAMMAR REPRESENTATION
  McCormack, J. P.; Cagan, J.; Vogel, C. M.

• HOW TO COMPREHEND AND ASSESS PRODUCT SEMANTICS - A PROPOSAL FOR AN INTEGRATED METHODOLOGY
  Petiot, J-F; Yannou, B.

• EVALUATION OF SOFT REQUIREMENTS DURING PRODUCT DESIGN
  Andersson, K.

• COSECO (CONTEXT-SENSITIVE-CONNECTOR) - A LOGICAL COMPONENT FOR A USER- AND USAGE-RELATED DOSAGE OF KNOWLEDGE
  Weiss, S.; Berger, B.; Jänsch, J.; Birkhofer, H.

• A MACHINE LEARNING-BASED APPROACH TO ACCELERATING COMPUTATIONAL DESIGN SYNTHESIS
  Vale, C. A. W.; Shea, K.

• A TOOL FOR CAPTURING DESIGN RATIONALE
  Bracewell, R. H.; Wallace, K. M.

• MODELLING INFORMATION FOR MECHATRONIC PRODUCTS
  Hallin, K.; Zimmerman, T.; Svensson, D.; Malmqvist, J.

• VISUALISING EARLY PRODUCT DESIGN INFORMATION WITH ENHANCED CONCEPT MAPS
  Salustri, F. A.; Parmar, J.

• VIRTUAL VERIFICATION OF SPLIT LINES WITH GIVEN REFERENCES
  Dagman, A.; Söderberg, R.

• INVESTIGATING MANUFACTURING DATA FOR USE WITHIN DESIGN
  Giess, M. D.; Culley, S. J.

• SUSTAINABLE INDUSTRIAL DESIGN METHODOLOGY FOR CHANGE IN A FACTOR 10 DIRECTION
  Støren Wigum, K.; Hanssen, O. J.

• HIDDEN PATTERNS OF INNOVATIVE ENVIRONMENTAL DESIGNED PRODUCTS
  Rosemann, B.

• ENGINEERING PARADIGMS FOR SUSTAINABLE DESIGN OF MOBILE TERMINALS
  Tanskanen, P.; Takala, R.

• HOW DO FUNCTIONAL SALES AFFECT PRODUCT DEVELOPMENT AND ENVIRONMENTAL PERFORMANCE?
  Ölundh, G.; Ritzén, S.

• DESIGN FOR FLEXIBILITY - MEASURES AND GUIDELINES
  Palani Rajan, P. K..; Van Wie, M.; Campbell, M.; Otto, K.; Wood, K.

• PRODUCT FAMILIES: A COST ESTIMATION TOOL TO SUPPORT “THE CONFIGURATION OF SOLUTION” PHASE
  Germani, M.; Otto, H. E.; Mandorli, F.

• AN AUTOMATED COST ESTIMATING SYSTEM FOR VARIANT DESIGN BASED ON THE METHOD OF SUCCESSIVE CALCULUS
  Elgh, F.; Sunnersjö, S.

• DESIGN OF PRODUCT FAMILIES: METHODOLOGY AND APPLICATION
  Agard, B.; Tollenaere, M.

• UNUSED POTENTIAL FOR BUILDING PLATFORM BASED PRODUCT FAMILIES
  Hofer, A. P.

• PRODUCT DESIGN ELEMENTS AS MEANS TO REALISE FUNCTIONS IN MECHANICAL CONCEPTUAL DESIGN
  Rehman, F.; Yan, X-T

• FUNCTIONAL MODELING OF CONTROL SYSTEMS
  Rajan, J. R.; Stone, R. B.; Wood, K. L.

• ANALYSIS OF RISK AND TIME TO MARKET DURING THE CONCEPTUAL DESIGN OF NEW SYSTEMS
  Hari, A.; Weiss, M. P.

• SPECIFICATION AND MODELLING OF HYBRID SYSTEMS: AN UML AND PETRI NETS INTEGRATED CONTRIBUTION
  Miled, F.; Brinzei,N.; Ferney, M.

• A COMPARISON BETWEEN INDIVIDUAL AND COLLECTIVE LEARNING IN DESIGN
  Wu, Z.; Kok, S. S.; Duffy, A.

• MODELLING AND CONTROLLING COUPLED, CONCURRENT DESIGN TASKS SUBJECTED TO EXTERNAL INFLUENCES
  Ong, K-L; Lee, S. S-G; Khoo, L-P

• A COMPARISON OF ALTERNATIVE APPROACHES FOR THE AUTOMATED ORGANISATION OF DESIGN INFORMATION
  Lowe, A.; McMahon, C. A.; Culley, S. J.

• OBJECT-LEVEL INFORMATION MANAGEMENT FOR DYNAMIC DESIGN PROCESS
  Sun, H.; Lu, W. F.

• ENVIRONMENTAL ISSUES AND ECOLOGICAL PROFILE IN ELECTRICAL AND ELECTRONICS PRODUCTS DESIGN
  Dammert, T.; Väänänen, A.; Valkama, J.

• ENVIRONMENTAL LEGISLATION AS A DRIVER OF DESIGN
  Jarratt, T. A. W.; Eckert, C. M.; Weeks, R.; Clarkson, P. J.

• DESIGN FOR SUSTAINABILITY - ANTICIPATING THE CHALLENGE
  Dewulf , W.

• THE CUSTOMER’S VALUE IN THE SUSTAINABLE DESIGN
  Vidal, R.; Bovea, M. D.

• SIMPLIFYING CONFIGURATION THROUGH CUSTOMER ORIENTED PRODUCT MODELS
  Leckner, T.; Lacher, M.

• PRODUCT DESCRIPTION USING CONFIGURABLE COMPONENTS
  Claesson, A.; Gedell, S.

• GENERATING PRODUCT ARCHITECTURES USING PARTITIONING ALGORITHMS
  Gaso, B.; Otto, K.

• A PRACTICAL TOOL FOR MASS-CUSTOMISING CONFIGURABLE PRODUCTS
  Tiihonen, J.; Soininen, T.; Niemelä, I.; Sulonen, R.

• THE SPIRAL OF APPLIED RESEARCH: A METHODOLOGICAL VIEW ON INTEGRATED DESIGN RESEARCH
  Eckert, C. M.; Clarkson, P. J.; Stacey, M. K.

• ABOUT THE DESIGN POLICY
  Marjanovic, D.

• A FUTURE VISION FOR THE ENGINEERING DESIGN ENVIRONMENT: A FUTURE SOCIOTECHNICAL SCENARIO
  Crowder, R.; Bracewell, R.; Hughes, G.; Kerr, M.; Knott, D.; Moss, M.; Clegg, C.; Hall, W.; Wallace, K.; Waterson, P.

• A TYPOLOGY OF DESIGNS AND DESIGNING
  Eder, W. E.

• LEARNING FROM PRACTICAL EXPERIENCE: A STUDY TO EXAMINE LEARNING STYLES WITHIN AN INTEGRATED METHODOLOGY FOR TEACHING ENGINEERING AND INDUSTRIAL DESIGN STUDENTS
  Pace, S.

• RESPONSES OF NOVICE DESIGNERS TO UNSTRUCTURED PROBLEMS
  Burvill, C.; Leary, M.; Weir, J.

• HOW TO CREATE SOUL AND IDENTITY IN A PROJECT? RITUALS AND THEATRE IN ENGINEERING DESIGN
  Fyhn, H.; Hildre, H. P.; Rusten, B.; Kristensen, K.; Storler, K.; Sivertsen, O. I.

• USING STUDENT DESIGN PROJECTS FOR SECONDARY SCHOOL OUTREACH
  Salustri, F. A.; Short, L. P.

• TECHNOLOGY-ECONOMY-DESIGN: TED INTEGRATED PRODUCT DEVELOPMENT IN CROSS DISCIPLINARY TEAMS
  Persson, J-G; Svengren, L.; Landqvist, J.

• UNIVERSAL FUNCTION-STRUCTURES IN EARLY DESIGN STAGES
  Koch, M.; Meerkamm, H.

• EFFICIENT SUPPORT FOR THE PRODUCT DEVELOPMENT PROCESS - COMPUTER-BASED METHOD-TOOLS FOR THE CONCEPTUAL PHASE
  Walter, S.; Sauer, T.; Weiss, S.; Birkhofer, H.

• IMPACT OF KNOWLEDGE TWISTING ON COMBINATORIAL EXPLOSION
  Žavbi, R.

• SIMILARITY CONSERVATION: A KEY TO FORMING THE FUNCTION SPACE
  Taura, T.; Tobita, S.

• A STUDY OF INFORMATION RETRIEVAL IN THE AEROSPACE DOMAIN
  del-Rey-Chamorro, F.; Wallace, K.

• NUCLEUS-BASED PRODUCT CONCEPTUALIZATION: APPLICATION IN DESIGNING FOR USE
  van der Vegte, W. F.; Horváth, I.

• PROCESS INTEGRATED CREATION OF PRODUCT INSTRUCTIONS
  Zwicker, E.; Diersson, S.; Leonhard, U.; Bichsel, M.

• MODELLING THE BEHAVIOUR OF CARTON BOARD FOR IMPROVED MACHINE AND PROCESS DESIGN
  Hicks, B. J.; Berry, C.; Mullineux, G.; McPherson, C. J.; Medland, A. J.

• MULTI-STAGE MODELING IN THE EARLY PHASES OF DESIGN
  Brix, T.; Döring, U.; Reeßing, M.

• CHARACTERISTICS OF A MULTI-VIEWPOINT FEATURE-BASED DESIGN AUTOMATION ENVIRONMENT
  Lee, K. H.; McMahon, C.

• CREATIVE DESIGN UNDER PRODUCT LIFECYCLE CONSTRAINTS - THE FUTURE OF PRODUCT DEVELOPMENT
  Dai, F.

• APPLICATION SCENARIOS FOR CLASS-SYSTEMS IN PRODUCT LIFECYCLE MANAGEMENT
  Puri, W.; Sander, S.; Meerkamm, H.

• INNOVATION AND DESIGN PROCESSES MODELING: A SYSTEMIC APPROACH
  Bocquet, J-C; Stal Le Cardinal, J.

• AN INTEGRATED ARCHITECTURE FOR FUNCTIONAL PRODUCTS
  Sivard, G.

• DESIGN OF VALUE CHAINS IN COMPANIES - AN INTEGRATED OPTIMISATION OF THE VALUE OF PRODUCTS AND PROCESSES
  Elhamdi, M.; Yannou, B.; Marx, D.

• INVESTIGATING KNOWLEDGE SEARCHES IN AEROSPACE DESIGN
  Aurisicchio, M.; Langdon, P. M.; Wallace, K. M.

• A CONCEPTUAL DESIGN SUPPORT SYSTEM USING PRINCIPLE SOLUTION ELEMENTS
  Wilhelms, S.

• INVESTIGATION OF THE DESIGN EXEMPLAR AS A CAD QUERY LANGUAGE
  Divekar, A. P.; Summers, J. D.

• INFUSED DESIGN: A BRIEF INTRODUCTION
  Shai, O.; Reich, Y.

• TOWARDS A DISASSEMBLY PROCESS-ORIENTED DESIGN OF SUSTAINABLE PRODUCTS
  Gries, B.; Blessing, L.

• DESIGN FOR ASSEMBLY AND DESIGN FOR DISASSEMBLY: TWO WAYS FOR THE DEVELOPMENT OF SUSTAINABLE PRODUCTS
  Fargnoli, M.; Pighini, U.; di Litta, E.

• LAYING THE FOUNDATIONS FOR A DFR TOOL FOR AUTO COMPONENTS
  Ferrão, P.; Amaral, J.; Silva, P.

• DESIGN EVALAUATION METHOD FOR THE DISASSEMBLY OF ELECTRONIC EQUIPMENT
  Campbell, M. I.; Hasan, A.

• CHALLENGES FOR CAX AND EDM IN AN INTERNATIONAL AUTOMOTIVE COMPANY
  Burr, H.; Deubel, T.; Vielhaber, M.; Haasis, S.; Weber, C.

• DEVELOPMENT OF ENGINEERING DESIGN METHODOLOGIES AND SOFTWARE TOOLS TO SUPPORT THE CREATIVE PROCESS OF DESIGN IN A DISTRIBUTED ENVIRONMENT
  Tormey, D.; Chira, C.; Chira, O.; Roche, T.; Brennan, A.

• PATTERNS OF DECISIONS IN DESIGN: LEAPS, LOOPS, CYCLES, SEQUENCES AND META-PROCESSES
  Badke-Schaub, P.; Gehrlicher, A.

• THE iLOFT PROJECT: A TECHNOLOGICALLY ADVANCED COLLABORATIVE DESIGN WORKSPACE AS RESEARCH INSTRUMENT
  Milne, A.; Winograd, T.

• DISTRIBUTED ENGINEERING VIA BROADBAND - A CASE STUDY
  Törlind, P.

• ESTABLISHING AN INFRASTRUCTURE FOR VALUE CHAIN COLLABORATION IN THE NORWEGIAN OIL INDUSTRY - A CASE STUDY
  Kristensen, K.; Hildre, H. P.; Slettebakk, J. K.; Sondov, M.; Høgberg, A.

• DISTRIBUTED TEAM INNOVATION - A FRAMEWORK FOR DISTRIBUTED PRODUCT DEVELOPMENT
  Larsson, A.; Törlind, P.; Karlsson, L.; Mabogunje, A.; Leifer, L.; Larsson, T.; Elfström, B-O

• HARNESSING NON STRUCTURED INFORMATION IN INTEGRATED DESIGN TEAM
  Gardoni, M.; Blanco, E.

• COORDINATION AND CONTROLLING OF DISTRIBUTED PRODUCT DEVELOPMENT PROCESSES
  Baumberger, C.; Pulm, U.; Lindemann, U.

• ENHANCED COLLABORATIVE DESIGN THROUGH INTERACTIVE DECISION ROOM
  Laborie, F.; Hugues, E.; Jessel, J-P

• A METHODOLOGY FOR PROSPECTIVE OPERATIONAL DESIGN CO-ORDINATION
  Coates, G.; Duffy, A. H. B.; Whitfield, R. I.; Hills, H.

• GRAI ENGINEERING METHODOLOGY FOR DESIGN PERFORMANCE IMPROVEMENT
  Girard, P.; Merlo, C.

• COMPUTER TOOLS IN PRODUCT DEVELOPMENT
  Wodehouse, A.; Bradley, D.

• SIGNPOSTING: MODELLING UNCERTAINTY IN DESIGN PROCESSES
  O’Donovan, B. D.; Clarkson, P. J.; Eckert, C. M.

• THE SIMULATED DESIGN PROCESS
  O’Donovan, B. D.; Clarkson, P. J.; Eckert, C. M.

• DYNAMIC MODULARISATION - A CHALLENGE FOR DESIGN PROCESS AND PRODUCT ARCHITECTURE
  Lehtonen, T.; Juuti, T.; Pulkkinen, A.; Riitahuhta, A.

• TOOLS SUPPORTING THE DEVELOPMENT OF MODULAR SYSTEMS
  Breidert, J.; Welp, E. G.

• MODULARIZING PRODUCT ARCHITECTURES USING DENDROGRAMS
  Hölttä, K.; Tang, V.; Seering, W. P.

• METHODOLOGY FOR PRODUCT STRUCTURING IN THE EARLY STAGES OF THE DESIGN PROCESS
  Sekolec, R.; Kunz, A.; Meier, M.

• RELATIONAL REASONING SUPPORTED BY QUANTITATIVE METHODS FOR PRODUCT MODULARIZATION
  Larses, O.; Blackenfelt, M.

• A RIGOROUS FRAMEWORK FOR MAKING COMMONALITY AND MODULARITY DECISIONS IN OPTIMAL DESIGN OF PRODUCT FAMILIES
  Fellini, R.; Kokkolaras, M.; Papalambros, P. Y.

• METHODS, TOOLS AND PROCESSES FOR THE DESIGN AND DEVELOPMENT OF INDIVIDUALISED PRODUCTS
  Lindemann, U.; Maurer, M.; Pulm, U.

• A METHOD FOR DEVELOPING ALTERNATIVE PRODUCT PORTFOLIOS AND ESTIMATING THEIR IMPACT ON COST AND VARIETY
  Chakrabarti, A.; Patki, U.; Nithamarthi, S.

• ASSESSMENT METHOD OF VALUE DISTRIBUTION FOR PRODUCT FAMILY DEPLOYMENT
  Fujita, K.; Takagi, H.; Nakayama, T.

• PRODUCT FAMILY DEVELOPMENT AND MANAGEMENT: ARCHITECTING FOR MAXIMUM PROFITABILITY
  Nidamarthi, S.; Mechler, G.; Karandikar, H.

• PRODUCT WITH LARGE DIVERSITY: AN APPROACH TOWARDS SIMULTANEOUS DESIGN OF PRODUCT AND SUPPLY CHAIN
  Hadj-Hamou, K.; Aldanondo, M.; Lamothe, J.

• CONFIGURATION OF PRODUCT FAMILIES USING FUZZY SET APPROACH
  Deciu, E.; Ostrosi, E.; Ferney, M.; Gheorghe, M.

• MODULE PROPERTY VERIFICATION - A CONCEPTUAL FRAMEWORK TO PERFORM PRODUCT VERIFICATIONS AT MODULE LEVEL
  Kenger, P.; Erixon, G.; Lennartsson, S.

• SHARING EXPERIENCE IN ENGINEERING DESIGN EDUCATION: HISTORICAL BACKGROUND AND FUTURE PLANS
  McMahon, C.; Ion, B.; Hamilton, P.

• NON-TECHNICAL SKILLS TRAINING FOR DESIGNERS
  Lauche, K.

• COMPREHENSIVE DEISGN ENGINEERING: A NEW PATH TO INNOVATION
  Feland, J. M.; Cockayne, W. R.; Leifer, L. J.

• USER SUITABLE TRANSFER OF DESIGN METHODS
  Jänsch, J.; Sauer, T.; Walter, S.; Birkhofer, H.

• AN ELECTRONIC TUTOR FOR STRUCTURAL DISTILLATION
  Field, B.; Burvill, C.; John Weir, J.

• PRO-TEACH-NET - AN E-LEARNING PLATFORM FOR PRODUCT DEVELOPMENT
  Zirkel, M; Vajna, S

• THE TRUTH ABOUT DESIGNING: CONCLUSIONS FROM THE VIDEO ASSISTED LEARNING IN DESIGN (VALiD) PROJECT
  Lloyd, P.; Valkenburg, R.; McDonnell, J.

• KNOWLEDGE STRUCTURES AND PROCESSES: TEACHING AND LEARNING IN THE CONTEXT OF “PRODUCT INNOVATION”
  Elspass, W. J.; Pereira, M.; Schorno, C.; Meier, M.

• MODULARISATION OF PRODUCT DEVELOPMENT CONTENTS AS A BASIS FOR A FLEXIBLE AND ADAPTIVE USE IN LEARNING, TEACHING AND PRACTICE
  Berger, B.; Jänsch, J.; Weiss, S.; Birkhofer, H.

• ECO-INNOVATION, COMBINING ECODESIGN AND TRIZ FOR ENVIRONMENTALLY SOUND PRODUCT DEVELOPMENT
  Strasser, C.; Wimmer, W.

• INFORMATION/INSPIRATION: A WEB BASED SUSTAINABLE DESIGN TOOL
  Bhamra, T. A.; Lofthouse, V. A.

• PROPOSAL OF LIFE CYCLE DESIGN SUPPORT METHOD USING DISPOSAL CAUSE ANALYSIS MATRIX
  Umeda, Y.; Hijihara, K.; Oono, M.; Ogawa, Y.; Kobayashi, H.; Hattori, M.; Masui, K.; Fukano, A.

• ESTIMATING ENVIRONMENTAL IMPACTS: THE USE-PHASE-ANALYSIS-MATRIX - A USE PHASE-CENTRED APPROACH
  Oberender, C.; Birkhofer, H.

• ARE DESIGNERS FULL EQUIPPED TO SUCCEED WITH NEW ENVIRONMENTAL REQUIREMENTS?.
  Gómez Navarro, T.; Capuz Rizo, S.; Viñoles Cebolla, R.; López, García; Bastante Ceca, M.

• LIFE CYCLE DESIGN FOR COMPANIES - SCALING LIFE CYCLE DESIGN METHODS TO THE INDIVIDUAL NEEDS OF A COMPANY
  Ernzer, M.; Birkhofer, H.

• COLLABORATIVE DESIGN OF A GLOBAL SUSTAINABILITY KNOWLEDGE NETWORK FOR ENGINEERS
  Radcliffe, D. F.; Clark, N.

• IPD AS A KEY TO SUSTAINABLE PRODUCTS
  Meerkamm, H.

• ENVIRONMENTAL IMPACT ASSESSMENT IN DESIGN OR IS IT WORTH IT TO CARRY OUT AN LCA?
  Ernzer, M.; Birkhofer, H.

• INTRODUCTION AND ADAPTATION OF METHODS FOR SUSTAINABLE PRODUCT DEVELOPMENT IN SMALL AND MIDDLE-SIZED COMPANIES - RESULTS AND EXPERIENCES
  Lindemann, U.; Heßling, T.; Hutterer, P.

• ECO-PAS - ESTIMATION THE ECO-EFFIENCEY OF CONCEPTUAL DESIGNS USING PARAMETRIC MODELLING
  Dewulf, W.; Duflou, J.

• AN ECO-INNOVATIVE DESIGN METHOD BY GREEN QFD AND TRIZ TOOLS
  Chen, J. L.; Liu, C-C

• INTERACTIVE VISUALIZATION FOR THE COMPARATIVE ANALYSIS OF LIFE CYCLES IN COMPLEX PRODUCT DESIGN
  Otto, H. E.; Mueller, K. G.; Kimura, F.

• „DESIGN FOR UPGRADING“ OF MACHINES AND PRODUCTION PROCESSES: A GUIDLINE BASED ON ACTUAL DEMANDS OF INDUSTRY AND SUSTAINABLE DESIGN
  Mörtl, M.

• THE INFLUENCE OF CULTURAL FACTORS IN THE IMPLEMENTATION OF PRODUCT-SERVICE SYSTEMS
  Gomez, L.; Carla Pasa, C.

• OVERCOMING DECISION TRAPS IN SUSTAINABLE DESIGN
  Kaldate, A.; Thurston, D.; Emamipour, H.; Rood, M.

• LIFE CYCLE VALUE IN PRODUCT DEVELOPMENT: A CASE STUDY IN THE TRANSPORTATION INDUSTRY
  Hallander, I.

• METHOD FOR AESTHETICS DESIGN IMPROVEMENT
  Wagner, R.; Osorio de Moraes, R.; Silveira Matsumura de Castro, R.

• SOME OBSERVATIONS ON WORK WITHIN A VIRTUAL PRODUCT DEVELOPMENT TEAM
  Žavbi, R.; Tavcar, J.

• ECODESIGN STRATEGIES AND THE PRODUCT DEVELOPMENT PROCESS WITHIN NORTHEAST SME BRAZILIAN COMPANIES
  Costa, G. J.; Gouvinhas, R. P.

• TIME VARIATION OF DESIGN “STORY TELLING” IN ENGINEERING DESIGN TEAMS
  Song, S.; Dong, A.; Agogino, A. M.

• AN AGENT BASED APPROACH TO FINDING EXPERTISE IN THE ENGINEERING DESIGN ENVIRONMENT
  Crowder, R.; Hughes, G.; Hall, W.

• GENDER ORIENTATION OF THE DESIGN TASK: PRODUCT DOMAIN AND FAMILIARITY ISSUES
  Okudan, G. E.; Bilén, S. G.; Wu, X.

• NEW THEORY-BASED CONCEPTS FOR PDM AND PLM
  Weber, C.; Deubel, T.

• STRUCTURING DESIGN KNOWLEDGE FOR BETTER DESIGN SYNTHESIS
  Tomiyama, T.

• STRUCTURING ENGINEERING DESIGN INFORMATION USING A MODEL OF HOW ENGINEERS’ INTUITIVELY STRUCTURE DESIGN INFORMATION
  Japikse, R.; Langdon, P.; Wallace, K. M.

• A SURVEY OF CONTEXT MODELING: APPROACHES, THEORIES AND USE FOR ENGINEERING DESIGN RESEARCHES
  Longueville, B.; Gardoni, M.

• A CONSTRAINT BASED APPROACH TO THE MODELLING AND ANALYSIS OF HIGH-SPEED MACHINERY
  Medland, A. J.; Mullineux, G.; Hicks, B. J.; McPherson, C. J.; Stone, C. E.

• A FUNCTIONAL ANALYSIS OF CHANGE PROPAGATION
  Flanagan, T. L.; Eckert, C. M.; Eger, T.; Smith, J.; Clarkson, P. J.

• INDUCING CHANGE PROPAGATION MODELS USING PREVIOUS DESIGNS
  Matthews, P.; Lowe, D.

• A GRAMMATICAL APPROACH TO COMPUTATIONAL GENERATION OF MECHANICAL CLOCK DESIGNS
  Starling, A. C.; Shea, K.

• THE GAME OF RATIONAL ENGINEERING DESIGN
  Samuel, A.; Lewis, W.

• KNOWLEDGE SUPPORT FOR CONCEPT EVALUATION AND SELECTION IN DESIGN FOR MASS CUSTOMIZATION
  Zha, X. F.; Lu, W. F.

• A NEW APPROACH TO MULTI-CRITERIA MATERIAL SELECTION IN ENGINEERING DESIGN
  Sirisalee, P.; Parks, G. T.; Clarkson, P. J.; Ashby, M. F.

• KNOWLEDGE INTENSIVE DECISION SUPPORT FOR DESIGN PROCESS: A HYBRID ROBUST MODEL AND FRAMEWORK
  Zha, X. F.

• ASSISTING DESIGNERS IN EVALUATING PROPOS ED SOLUTIONS THROUGHOUT THE DESIGN PROCESS
  Lonchampt, P.; Prudhomme, G.; Brissaud, D.

• TOWARD A PROJECT MEMORY FOR INNOVATIVE PRODUCT DESIGN, A DECISION-MAKING PROCESS MODEL
  Longueville, B.; Stal Le Cardinal, J.; Bocquet, J-C; Daneau, P.

• SIMULATION BASED OPTIMISATION FOR SYSTEM DESIGN
  Krus, P.

• FROM CREATIVE IDEAS TO OPTIMIZED CONCEPTS AND BACK A METHOD FOR COLLABORATIVE CREATION OF SOLUTION ALTERNATIVES IN DECISION SUPPORT SYSTEMS
  van Overveld, K.; Ivashkov, M.

• IMROVING THE ROBUSTNESS OF MULTICRITERIA DECISION MAKING
  Ariel, S.; Reich, Y.

• PROCESS BASED RESSOURCE-ORIENTED CALCUALTION OF THE RELATIVE COSTS OF PRODUCT CONCEPTS
  Giannoulis, D.; Welp, E. G.

• TEACHING NPD AT DELFT UNIVERSITY OF TECHNOLOGY
  Buijs, J.; Valkenburg, R.

• GRADUATE STUDY OF DESIGN PEDAGOGY
  Fauvel, O. R.; Caswell, D.; Johnston, C.; Brusse-Gendre, T.; McDonald, C.

• STRIKING A BALANCE BETWEEN ENGINEERING SCIENCE AND ENGINEERING DESIGN: CREATION OF AN INTERDISCIPLINARY ENGINEERING PROGRAM
  Stone, R. B.; Hubing, N.; Philpot, T.; Schroetlin, J.

• DEVELOPING SKILLS FOR SOLVING COMPLEX DESIGN PROBLEMS
  Weir, J.; Lewis, W.; Burvill, C.

• A FRAMEWORK OF “ RE+DESIGN” WORKSHOPS
  Yokoyama, M.; Tanaka, H.; Baba, Y.

• NEW REQUIREMENTS FOR ENVIRONMENTAL EDUCATION FOR DESIGNERS AND ENVIRONMENTAL ENGINEERS
  Tingström, J.; Åkermark, A-M

• ENGINEERING EDUCATION SEEING FROM VIEWPOINT OF ENVIRONMENT CONSERVATION -A PROPOSAL FOR CURRICULUM REORGANIZATION
  Murakami, K.

• ROLES AND RESPONSIBILITIES FOR STUDENT DESIGN PROJECTS
  Brusse-Gendre, T.; Fauvel, O. R.; Caswell, D. J.; Johnston, C. R.

• ENGINEERING STUDENTS AND ROBOT CONTESTS: LEARN LIFE TO THE MAX!
  Jansen, A.

• ALTERATIONS IN STUDENTS’ ABILITY TO SOLVE PROBLEMS BY INTRODUCTION OF THE ELEMENT MODEL C&CM INTO THE KARLSRUHE EDUCATION MODEL FOR INDUSTRIAL PRODUCT DEVELOPMENT KALEP
  Arlbers, A.; Matthiesen, S.; Ohmer, M.

• ENGINEERING SCIENCE TO ENGINEERING DESIGN
  Ali Khan, Z.; Wallace, K.

• MAINTAINING DESIGN PROFESSIONALISM IN LARGE ORGANISATIONS
  Kirk, G. E.

• TECHNOLOGY DEVELOPMENT AND FUTURE AIRCRAFT DESIGN AS A METHODICAL CHALLENGE
  Frankenberger, E.

• UK DESIGN RESEARCH AND ITS IMPACT ON INDUSTRIAL PRACTICE FOR PRODUCT DEVELOPMENT
  Sheldon, D. F.; Foxley, D.

• RELATING THE SENSITIVITY OF PACK ASSEMBLY PROCESSES TO MACHINE CONFIGURATION AND PACK GEOMETRY
  Medland, A. J.; Bowler, C.; Hicks, B. J.; Mullineux, G.

• CONCEPTUAL DESIGN APPROACH FOR MECHATRONIC SYSTEMS CONTROLLED BY A PROGRAMMABLE LOGIC CONTROLLER (PLC)
  Bathelt, J.; Jönsson, A.; Bacs, C.; Kunz, A. M.; Meier, M.

• MANUFACTURING AS THE CUSTOMER OF DESIGN - AN INDUSTRIAL CASE STUDY
  Wright, C. R.

• MODULARISATION IN ONE-OF-A-KIND PRODUCT ENVIRONMENT, AN INDUSTRIAL CASE
  Oja, H.

• THE DESIGN OF THE ROLLS-ROYCE TRENT 500 AEROENGINE
  Kirk, G. E.

• REAL TIME RAPID PRODUCT DEVELOPMENT PROCESS DATA AND INFORMATION MANAGEMENT FOR SMALLER ENTERPRISES
  Shaw, A.; Aitchison, D.

• CHARACTERISTICS OF PRODUCT FAMILY DEVELOPMENT IN INDUSTRY
  Pulkkinen, A.; Lehtonen, T.; Riitahuhta, A.

• AN INTEGRATED APPROACH FOR INTRODUCING ECODESIGN INTO AN INDUSTRIAL COMPANY - FROM CUSTOMER DEMANDS TO AN ENVIROMENTAL PRODUCT DECLARATION
  Wimmer, W.; Bey, N.; Malsch, A.

• DESIGNERS AND MANUFACTURERS’ PERSPECTIVES ON INCLUSIVE/UNIVERSAL DESIGN
  Dong, H.; Keates, S.; Clarkson, P. J.

• THE COMPETENCY-DECISION LINK IN DESIGN PROCESSES
  Mekhilef, M.; Mira-Bonnardel, S.

• DESIGN MANAGEMENT LESSONS LEARNED FROM TWO STUDIES IN NEW PRODUCT DESIGN
  Löfstrand, M.; Thompson, G.

• SYSTEMATIC APPROACH TO PRODUCT DESIGN USING AXIOMATIC DESIGN: APPLICATION TO A DIESEL LOCOMOTIVE
  Arcidiacono, G.; Campatelli, G.; Citti, P.

• THE ISSUES AND BENEFITS OF AN INTEGRATED APPROACH TO SYSTEMS DESIGN WITH STANDARD COMPONENTS - AN INDUSTRIAL CASE STUDY
  Hicks, B. J.; Culley, S. J.; Mullineux, G.

• CONTROLLING PRODUCT RELATED ENGINEERING CHANGES IN THE AIRCRAFT INDUSTRY
  Riviere, A.; Féru, F.; Tollenaere, M.

• COMPARATIVE STUDY ON THE IMPLEMENTATION OF IDE IN AFRICAN COUNTRIES
  Diehl, J. C.; Christiaans, H. H. C. M.

• THE EVOLUTION OF A COMMUNITY OF PRACTICE FOR KNOWLEDGE MANAGEMENT
  Kerr, M. P.; Stewart, A. B. D.

• A NOVEL APPROACHES TOWARDS DESIGN INFORMATION MANAGEMENT WITHIN AIRBUS
  Lowe, A.; McMahon, C. A.; Culley, S. J.; Coleman, P.; Dotter, M.

• COMBINING EVIDENCE TO JUSTIFY THE APPROPRIATE USE OF MODELS IN ENGINEERING DESIGN
  Rajabally, E.; Sen, P.; Whittle, S.; Dalton, J.

• ARCHITECTING MODELS OF TECHNICAL SYSTEMS FOR NON-ROUTINE SIMULATIONS
  Sellgren, U.

• THE DEVELOPMENT OF A KNOWLEDGE MANAGEMENT MODEL TO SUPPORT PRODUCT DESIGN PROCESS WITHIN BRAZILIAN SME COMPANIES
  Gouvinhas, R. P.; Costa, P. E. C.

• EXTENDED CAD MODEL
  Bojcetic, N.; Storga, M.; Pavkovic, N.

• SITUATION THEORETIC ANALYSIS OF FUNCTIONS FOR A FORMAL THEORY OF DESIGN
  Kikuchi, M.; Nagasaka, I.

• A GENERATIVE MODELING APPROACH TO ENGINEERING DESIGN
  Isaksson, O

• LINKING ANALYTICAL TARGET CASCADING TO ENGINEERING INFORMATION SYSTEMS FOR SIMULATION-BASED OPTIMAL VEHICLE DESIGN
  Nyström, M.; Larsson, T.; Karlsson, L.; Kokkolaras, M.; Papalambros, P. Y.

• AN UML MODELING OF AN ARCHITECTURE FOR KNOWLEDGE DOCUMENTATION
  Mekhilef, M.; Bourey, J. P.; Bigand, M.

• TOWARDS A CHANGE PROCESS PLANNING TOOL
  Eger, T.; Eckert, C. M.; Clarkson, P. J.

• A HOLISTIC APPROACH TO MODULARIZATION
  Fagerström, B.; Jackson, M.

• THE STRATEGIC PROCESS FOR DEVELOPING A BUILDING SET ON COMPLEX PRODUCTS
  Baumberger, C.; Lindemann, U.; Pulm, U.

• INTELLIGENT DESIGN GUIDANCE
  Whitfield, R. I.; Duffy, A. H. B.; Wu, Z.; Meehan, J.

• EXPLORING DESIGN PROCESSES FOR SAFETY CRITICAL SYSTEMS DESIGNED AS COMBINATIONS OF ‘OFF-THE-SHELF’ SOLUTIONS
  López-Mesa, B.; Grante, C.

• SCRM: A NEW DESIGN TOOL FOR IMPROVING SAFETY LEVEL OF MECHANICAL SYSTEMS
  Fargnoli, M.; Pighini, U.

• CONTINOUS CAD-INTEGRATED RELIABILITY EVALUATION THROUGHOUT THE DESIGN PROCESS
  Otte, B.; Ruppert, H.; Bertsche, B.

• MANAGING DESIGN DATA FOR PROBABILISTIC EVALUATION OF AIRCRAFT CONCEPTS
  Johansson, B.; DeLaurentis, D. A.; Mavris, D. N.

• A COMPARISON OF SYSTEM RELIABILITY STRATEGIES IN LIVING ORGANISMS AND ENGINEERING
  Burgess, S.

• SAFETY CONSIDERATIONS IN OPTIMISATION OF DESIGN SPECIFICATION CONTENT
  Grante, C.; Andersson, J.

• REQUIREMENTS FOR A FAILURE MODE TAXONOMY FOR USE IN CONCEPTUAL DESIGN
  Tumer, I. Y.; Stone, R. B.; Bell, D. G.

• EFFECTS THAT DEFEAT RISK REDUCING MEASURES
  Busby, J. S.; Hughes, E. J.

• DESIGN FOR RELIABILITY: A NEW METHODOLOGY FOR THE EVALUATION OF THE IMPACT OF AUTOMOTIVE EXHAUST EMISSIONS ON THE ENVIRONMENT
  Pierini, M.; Delogu, M.; Schiavone, F.

• IDENTIFYING THE DESIGN ENGINEERING BODY OF KNOWLEDGE
  Frise, P. R.; Rohrauer, G. L.; Minaker, B. P.; Altenhof, W. J.

• ANALYSIS OF SYNTHESIS FOR REFLECTIVE LEARNING IN PROJECT-BASED DESIGN EDUCATION
  Fujita, K.

• A MODULAR APPROACH TO EXPERIMENTAL LEARNING AND FAST PROTOTYPE DESIGN OF MECHATRONIC SYSTEMS - INTRODUCING THE MECHATRONIC LEARNING CONCEPT
  Grimheden, M.; Hanson, M.

• THE EVOLVE PROJECT - A MECHATRONIC PROJECT FOR FINAL YEAR STUDENTS
  Andersson, J.; Palmberg, J-P

• THE PRODUCT-DEVELOPMENT NEEDS OF SMALLER MANUFACTURING FIRMS
  Stauffer, L. A.; Kirby, A. D.

• SAFETY ANALYSIS DURING INDUSTRIAL EQUIPMENT REDESIGN: EVALUATION OF A CASE STUDY
  Gauthier, F.

• RESOLVING COMPLEXITY IN FATIGUE-LIMITED DESIGN
  Leary, M.; Burvill, C.

• COMPLEXITY ASSISTANT - APPLICATION OF THESAURUS TECHNOLOGY IN THE AUTOMOTIVE INDUSTRY
  Hauck, C.; Puri, W.; Meerkamm, H.

• EXPLORING THE STRUCTURE OF DESIGN PROBLEMS
  Dorst, K.

• ASKING GENERATIVE DESIGN QUESTIONS: A FUNDAMENTAL COGNITIVE MECHANISM IN DESIGN THINKING
  Eris, Ö.

• THE EFFECTIVENESS OF PSYCHOLOGICAL DISTANCE IN AN EMPIRICAL STUDY OF GUIDELINE CLUSTERING FOR AEROSPACE DESIGN
  Langdon, P.; Japikse, R.; Clarkson, P. J.; Wallace, K.

• AN INTEGRATED ETHNOGRAPHIC AND EMPIRICAL METHODOLOGY IN A STUDY OF KNOWLEDGE SEARCHES IN AEROSPACE DESIGN
  Langdon, P.; Aurisicchio, M.; Clarkson, P. J.; Wallace, K.

• DEVELOPMENT OF A REPRESENTATION SCHEME FOR THE APPLICATION OF GENETIC METHODOLOGY TO FUNCTIONAL DESIGN
  Güroglu, S.; Erden, A.

• UNIVERSAL ABDUCTION STUDIO - PROPOSAL OF A DESIGN SUPPORT ENVIRONMENT FOR CREATIVE THINKING IN DESIGN
  Takeda, H.; Sasaki, H.; Nomaguchi, Y.; Yoshioka, M.; Shimomura, Y.; Tomiyama, T.

• USING SELF ORGANIZING MAPS AN A DESIGN EXPLORATION
  Matthews, P.; Wallace, K.

• NEW GUIDELINE VDI 2206 - A FLEXIBLE PROCEDURE MODEL FOR THE DESIGN OF MECHATRONIC SYSTEMS
  Gausemeier, J.; Moehringer, S.

• RELATING THE QUALITY OF THE IDEA GENERATION PROCESS TO THE QUALITY OF THE RESULTING DESIGN IDEAS
  van der Lugt, Remko

• ON THE COMPLEXITY OF THE DESIGNER-ARTIFACT-USER SYSTEM
  Maier, J. R. A.; Fadel, G. M.

• EARLY COST ESTIMATION OF SHAFTS BASED ON DESIGN PRINCIPLES
  Giannoulis, D.; Welp, E. G.

• ASSEMBLY SYNTHESIS FOR OPTIMAL IN-PROCESS DIMENSIONAL ADJUSTABILITY BASED ON A JOINT LIBRARY
  Lee, B.; Saitou, K.

• LINKING ELASTIC DEFORMATIONS AND FABRICATION DEVIATIONS IN COMPUTER-AIDED-ANALYSIS
  Lustig, R.; Meerkamm, H.

• THE SYSTEMATIC EVALUATION OF DIFFERENT APPROACHES IN MODELLING FUNCTIONS TO ACHIEVE COST-ORIENTED DESIGN OF ENGINEERING PRODUCTS
  Schlink, H.; Schneider, H.; Scheller, A.

• A DETAILED COMPARATIVE ANALYSIS OF TWO MECHANICAL PRODUCTS WITH A VALUE ANALYSIS APPROACH
  Zwolinski, P.; Prudhomme, G.

• AMBIGUITY IS A DOUBLE-EDGED SWORD: SIMILARITY REFERENCES IN COMMUNICATION
  Eckert, C.; Stacey, M.; Earl, C.

• A TAXONOMIC CLASSIFICATION OF COLLABORATIVE DESIGN
  Ostergaard, K. J.; Summers, J. D.

• WEB SERVICES AS A VIRTUAL PRODUCT DEVELOPMENT ENVRIONMENT
  Storga, M.; Bojcetic, N.; Marjanovic, D.

• WHAT REPRESENTATION DO DESIGNERS BUILD OF THE FUTURE USERS OF THEIR DESIGN?
  Darses, F.

• DESIGN DOCUMENT MANAGEMENT IN NETWORKED PRODUCT DEVELOPMENT THROUGH STANDARD FRAMEWORKS
  Kotinurmi, P.; Borgman, J.; Soininen, T.

• METHODS ARE NETWORKS OF METHODS
  Lindemann, U

• EXPLORING THE NEED FOR AN INTERACTIVE SOFTWARE TOOL FOR THE APPROPRIATE SELECTION OF DESIGN METHODS
  López-Mesa, B.; Thompson, G.

• SUPPORTING THE SELECTION, ADAPTATION AND APPLICATION OF METHODS IN PRODUCT DEVELOPMENT
  Braun, T.; Lindemann, U.

• USABILITY IN INDUSTRY OF METHODS FROM DESIGN RESEARCH
  Bylund, N.; Grante, C.; López-Mesa, B.

• STRENGTHENING EXPERIENTIAL LEARNING IN DESIGN THROUGH COURSE DOCUMENTATION
  Johnston, C. R.; Caswell, D. J.; Fauvel, O. R.; Brusse-Gendre, T.

• DISCOURSE ANALYSIS FOR DESIGN EDUCATION
  Winkelman, P. M.; Fauvel, O. R.

• DESIGN IS FUN! - EXPERIENCES FROM A STUDENT DESIGN CONTEST AT DARMSTADT UNIVERSITY OF TECHNOLOGY
  Dick, M.; Birkhofer, H.

• PEDAGOGIC EXPERIENCES IN PROJECT-BASED ACTIVITIES IN THE COURSE OF DESIGN IN THE PUC-RIO
  Ribeiro, F-N; Couto, R-M

• UTILIZING DESIGN EDUCATION TO STIMULATE LIFE-LONG LEARNING WITHOUT THE PAIN
  Feland, J. F.; Fisher, C. A.; Bartolomei, J.

• THE SYSTEM DESIGN AND OPERATIONAL EFFECTIVENESS (SDOE) PROGRAM: EXPERIENCES AND LESSONS LEARNED
  Verma, D.; Pennotti, M.; Buede, D.; Farr, J.

• THE DEVELOPMENT OF A TAILORED SYSTEMS ENGINEERING PROCESS FOR EXTRACURRICULAR STUDENT DESIGN PROJECTS
  Mann, L. M. W.; Radcliffe, D. F.

• DESIGN HISTORY OF THE CAR: AN EMPIRICAL OVERVIEW OF THE DEVELOPMENT OF LAYOUT AND FORM
  Dowlen, C.; Shackleton, J.

• THE “CULTURAL DNA” OF WORLD-RENOWNED DESIGNERS
  Rodgers, P. A.

• AESTHETICS IN NATURE: CASE STUDY OF THE PEACOCK TAIL FEATHERS
  Burgess, S.

• DISCOVERING CULTURAL INFLUENCES DURING THE ‘SCRIPTING’ OF PRODUCTS
  Strickfaden, M.; Rodgers, P. A.

• VISUALISING DESIGN EXCLUSION
  Clarkson, P. J.; Dong, H.; Keates, S.

• NEW APPROACH USING ARTIFICIAL NEURAL NETWORKS FOR MODELLING AND EVALUATION OF MAN-MACHINE-INTERACTION AT THE START-UP PROCESS IN PASSENGER CARS
  Albers, A.; Albrecht, M.

• ADAPTATION OF A DISABILITY SEVERITY SCALE FOR PRODUCT ASSESSMENT
  Clarkson, P. J.; Dong, H.; Keates, S.

• HUMAN POWER; COMFORTABLE ONE- HAND CRANKING
  Jansen, A.; Slob, P.

• CLASSIFICATION OF USERS - DUE TO THEIR RELATION TO THE PRODUCT
  Janhager, J.

• INCLUDING INTERDISCIPLINARITY IN INDUSTRIAL DESIGN
  Lévy, P.; Guénand, A.

• DEVELOPING PLANS OF USE: AN ALTERNATIVE ANALYSIS OF ENGINEERING DESIGNING
  Vermaas, P. E.; Houkes, W.

• USING DESIGN PROCESS TOOLS TO ASSIST IN THE ANALYSIS OF A PROTOCOL RECORDING
  Sim, S. K.; Clarkson, P. J.; Wynn, D.

• A FRAMEWORK OF THE GENETIC-ENGINEERING-BASED DESIGN THEORY AND METHODOLOGY FOR PRODUCT INNOVATION
  Chen, K-Z; Feng, X-A

• A NEW APPROACH TO MODELING OF THE DESIGN PROCESSES
  Rohatynski, R.

• A METHODOLOGY FOR COMPARING DESIGN PROCESSES
  Stacey, M.; Earl, C.; Claudia Eckert, C.; O’Donovan, B.

• EVALUATION OF PROCESS MODELLING APPROACHES TO SUPPORT PROBABILISTIC DESIGN ANALYSIS
  Goh, Y. M.; Booker, J. D.; McMahon, C. A.

• TOWARDS AN ACTION LOGIC FOR DESIGN PROCESSES
  Salustri, F. A.

• ENGINEERING DESIGN PROCESS MODELLING IN ACTION - EMBRAER’S APPROACH - INSIGHTS AND LESSONS LEARNED
  Mendes, L. A. G.; Araujo, C. S.; Toledo, L. B.; Resende, H. B.

• A KNOWLEDGE MANAGEMENT SYSTEM FOR INDUSTRIAL DESIGN RESEARCH PROCESSES
  Frank, C.; Gardoni, M.

• A SYMBIOSIS-BASED FUNCTIONAL REASONING MODEL FOR ORIGINAL DESIGN
  Chen, Y.; Feng, P.; Pan, S.

• DYNAMIC COGNITION AND CREATIVITY IN DESIGN THINKING PROCESS
  Nagai, Y.

• THE AUTOGENETIC DESIGN THEORY - AN EVOLUTIONARY VIEW OF THE DESIGN PROCESS
  Clement, S.: Jordan, A.; Vajna, S.

• INDEXING DESIGN KNOWLEDGE BASED UPON DESCRIPTIONS OF DESIGN PROCESSES
  Ahmed, S.; Wallace, K.