Join Now!

Join our welcoming International Design Community.

Read about the many benefits of becoming and remaining a member.

Full, Associate, Departmental and Institutional Membership available.

Complete this application form to join now.

Banner
Books & Proceedings

DS 58-1: Proceedings of ICED 09, the 17th International Conference on Engineering Design, Vol. 1, Design Processes, Palo Alto, CA, USA, 24.-27.08.2009

Year: 2009

Editor: Norell Bergendahl, M.; Grimheden, M.; Leifer, L.; Skogstad, P.; Lindemann, U.

ISBN: 978-1-904670-05-6

Description

ISBN 978-1-904670-05-6
The ICED series of conferences is the Design Society's "flagship" event. ICED'09 took place on August 24-27, 2009, at Stanford University’s verdant campus in Palo Alto, California.
The Proceedings of the conference are published in 10 individual volumes, arranged according to topics.
All volumes of the Proceedings may be purchased individually through Amazon and other on-line booksellers.
For members of the Design Society, all papers are available on this website.

EventTable of Contents
Extending Multiple Domain Matrices to Allow for the Modeling of Boolean Operators in Process Models
Kreimeyer, Matthias; Braun, Stefanie; Gürtler, Matthias; Lindemann, Udo (1-12)
Statistical Analysis of Process Simulations
Karniel, Arie; Reich, Yoram (13-24)
Design Project Planning, Monitoring and Re-planning through Process Simulation
Wynn, David C.; Clarkson, P. John (25-36)
Decision-Focused Product Development Process Improvements
Eriksson, Joakim; Brannemo, Anette (37-48)
Co-Evolution of Products & Communities in Mass Collaborative Product Development: a Computational Exploration
Panchal, Jitesh (49-60)
Mechatronics Engineering on the Example of an Innovative Production Vehicle
Ziemniak, Pawel; Stania, Marek; Stetter, Ralf (61-72)
Approach for Managing Lean Product Design
Germani, Michele; Raffaeli, Roberto; Mengoni, Maura; Graziosi, Serena (73-84)
The Iterative Nature of Medical Device Design
Shluzas, Lauren A.; Pietzsch, Jan B.; Paté-Cornell, M. Elisabeth; Yock, Paul G.; Linehan, John H. (85-96)
Design Quantification
Petersen, Soren Ingomar (97-106)
Synergy between Engineering and Architectural Design
Zeiler, Wim; Savanovic, Perica (107-118)
A Highly Flexible Project Maturity Management Method for the Early Phase of Product Development
Jahn, Tobias; Binz, Hansgeorg (119-132)
About the Use of TRIZ for Product-Service Development
Rovida, Edoardo; Bertoni, Marco; Carulli, Marina (133-144)
Problem Formulation as a Discursive Design Activity
Hansen, Claus Thorp; Dorst, Kees; Andreasen, Mogens Myrup (145-156)
Organizational Factors Affecting Product Innovation Capability: Findings from the Med-Tech Industry
Olsson, Annika; Blomé, Mikael; Guve, Bertil; Kaulio, Matti; Norell Bergendahl, Margareta; Odenrick, Per (157-168)
Integrated Product and Process Development Based on Robust Design Methodology
Mathias, Johannes; Kloberdanz, Hermann; Engelhardt, Roland; Birkhofer, Herbert (169-180)
Design: The Evolution of Information Punctuated by Decisions
Ullman, David (181-192)
Managing Early Phases of Innovation Processes and the Use of Methods within Empirical Results From an Industry Survey
Franke, Stephan; Kirschner, Rafael; Kain, Andreas; Becker, Ingo; Lindemann, Udo (193-204)
Assessing Impact Analysis Practice to Improve Change Management Capability
Kilpinen, MS; Eckert, CM; Clarkson, PJ (205-216)
Towards Empirically-Derived Guidelines for Process Modelling Interventions in Engineering Design
Kerley, Warren P; Wynn, David C; Moss, Michael A; Coventry, Gina; Clarkson, P John (217-228)
A New Reverse Engineering Methodology Based on Knowledge Extraction and Geometrical Recognition Approaches
Durupt, Alexandre; Remy, Sebastien; Ducellier, Guillaume; Guyot, Emmanuel (229-240)
Coping with Multidisciplinary Product Development - a Process Model Approach
Krehmer, Hartmut; Eckstein, Raiko; Lauer, Wolfgang; Roelofsen, Julia; Stöber, Christina; Troll, Alexander; Weber, Nadine; Zapf, Jochen (241-252)
A Modeling Method to Manage Change Propagation
Koh, Edwin C.Y.; Clarkson, P. John (253-264)
Design Processes and Novelty in Small Companies: A Multiple Case Study
Löfqvist, Lars Gunnar (265-278)
Competitive Advantage Through Packaging Design? Propositions for Supply Chain Effectiveness and Efficiency
Olander-Roese, Malin; Nilsson, Fredrik (279-290)
A Method for Identifying Improvement Potentials within Product Development Processes
Gries, Bruno; Gericke, Kilian (291-298)
A Methodology for the Development of Automated Consumer Products
Nagel, Robert Lewis; Stone, Robert B. (299-310)
Improving Effectiveness of Agile Development
Menachem, Shelly; Reich, Yoram (311-322)
Towards an Understanding of the Impact of Resources on the Design Process
Boyle, Iain; Duffy, Alex H.B; Whitfield, Robert Ian; Liu, Shaofeng (323-334)
Pragmatic Design Rules for Selective Load Introduction in Structural Sheets
Niedermeier, Michael; Henne, Markus; Keller, David; Kress, Gerald; Stetter, Ralf (335-346)
An Approach for Consideration Competences of Elderly People in the Development of Technical Systems
Paetzold, Kristin; Stöber, Christina (347-356)
Innovation the Long Way Round: Transferring Rapid Prototyping Technology into Fashion Design
Eckert, Claudia; Delamore, Phillip (357-368)
A Framework for Balancing Efficiency and Effectiveness in Innovative Product Design
Marion, Tucker J (369-378)
Design Thinking Imbedded in Products
Petersen, Soren Ingomar; Stevels, Ab (379-388)
Design Thinking Affect on Design Quality, as Defined by Design Award Reception
Petersen, Soren Ingomar; Stevels, Ab (389-398)
A Reference Model for Using Visualization within Product Realization Projects
Wikström, Anders (399-410)
Framework And Metrics For Assessing The Guidance Of Design Processes
Clevenger, Caroline Murrie; Haymaker, John Riker (411-422)
Validation of Environment-Based Design (EBD) through Protocol Analysis Experiment
Feng, Di; Zeng, Yong (423-434)
Implementation Of Open Innovation Practices In Swedish Manufacturing Industry
Parida, Vinit; Johansson, Christian; Larsson, Tobias (435-446)
A Case Study of Idea Work in the Early Phases of Product Development
Gish, Liv; Clausen, Christian; Hansen, Claus Thorp (447-458)
Approaches to Mitigate the Impact of Uncertainty in Development Processes
Chalupnik, Marek J.; Wynn, David C.; Clarkson, P. John (459-470)
A Morphological Design Approach to User-EfficientDesign
Elias, Edward W. A.; Orme, Martyn; Dekoninck, Elies A.; Culley, Steve J. (471-482)
The Process of Engineering Design: A Comparison of three Representations
Atman, Cynthia J.; Deibel, Katherine; Borgford-Parnell, Jim (483-494)
Architects and Visually Impaired People: Analyzing Two Ways of Talking
Vermeersch, Peter-Willem; Strickfaden, Megan; Herssens, Jasmien; Heylighen, Ann (495-506)
Prototyping to Learn: Characterizing Engineering Students’ Prototyping Activities and Prototypes
Lande, Micah; Leifer, Larry (507-516)
Study on User’s Emotions and Needs to Design a New Product for Carrying Ski Equipments
Tashakorinia, Zahra; Arabkheradmand, Amir Hossein; Choopankareh, Vahid (517-526)
Can we Engineer Better Process Models?
Kannengiesser, Udo (527-538)
Managing Cycles in Development Processes - Analysis and Classification of External Context Factors
Langer, Stefan Frederik; Lindemann, Udo (539-550)
Emergent Design Methodologies and Implications
Carter, Carissa Lark; Edelman, Jonathan Antonio (551-558)
The P3 Platform: An Approach and Software System for Developing Diagrammatic Model-Based Methods in Design Research
Wynn, David C; Nair, Seena M T; Clarkson, P John (559-570)
Describing Information Use In Engineering Design Processes Using a Diagrammatic Model
Grebici, Khadidja; Wynn, David C; Clarkson, P John (571-582)
Communication and Design Process Planning: Initial Insights from Literature and Industry Interviews
De Lessio, Mark Philip; Wynn, David C.; Clarkson, P. John (583-594)
Requirement Negotiation for Feasible Service Development
Watanabe, Kentaro; Kimita, Koji; Tateyama, Takeshi; Shimomura, Yoshiki (595-606)
A Descriptive Model of the Current Microelectromechanical Systems (MEMS) Development Process
Sagoo, Jeevan; Tiwari, Ashutosh; Alcock, Jeffrey (607-)
ds conferenceICED09: 17th International Conference on Engineering Design

The Design Society and the Stanford Center for Design Research cordially invite you to participate in the International Conference on Engineering Design, ICED'09. The venue will be Stanford University’s verdant campus in the heart of Silicon Valley, a short 35 miles south of San Francisco, California. Research papers and case studies are solicited on any topic related to design thinking, theory, and practice, with a premium placed on evidence-based research. Topics and Themes include: *...

Read More

Join Now!

Join our welcoming International Design Community.

Read about the many benefits of becoming and remaining a member.

Full, Associate, Departmental and Institutional Membership available.

Complete this application form to join now.

SIG Workshop - March 2013